Bedienungsanleitung Hikvision DS-7716NI-E4 (Seite 209 von 225) (Englisch)

662624

209

Zoom out

Zoom in

Vorherige Seite

1/225

Nächste Seite

User Manual of Network Video Recorder

208

Check the brand, model of the switch connecting IP camera and NVR, and contact with the manufacturer

of the switch to check if it has the function of flow control. If so, please turn it down.

5. Check if the fault is solved by the step 1 to step 4.

If it is solved, finish the process.

If not, please contact the engineer from our company to do the further process.



No monitor connected with the NVR locally and when you manage the IP camera to connect with the

device by web browser remotely, of which the status displays as Connected. And then you connect the

device with the monitor via VGA or HDMI

interface and reboot the device, there is black screen with

the mouse cursor.

Connect the NVR with the monitor before startup via VGA or HDMI

interface, and manage the IP

camera to connect with the device locally or remotely, the status of IP camera displays as Connect.

Possible Reasons:

After connecting the IP camera to the NVR, the image is output via the main spot interface by default.

Steps:

1. Enable the output channel.

2. Select “Menu > Configuration > Live View > View”, and select video output interface in the drop-down

list and configure the window you want to view.

 The view settings can only be configured by the local operation of NVR.

 Different camera orders and window-division modes can be set for different output interfaces

separately, and digits like “D1”and “D2” stands for the channel number, and “X” means the selected

window has no image output.

3. Check if the fault is solved by the above steps.

If it is solved, finish the process.

If not, please contact the engineer from our company to do the further process.



Live view stuck when video output locally.

Possible Reasons:

a) Poor network between NVR and IP camera, and there exists packet loss during the transmission.

b) The frame rate has not reached the real-time frame rate.

Steps:

1. Verify the network between NVR and IP camera is connected.

1) When image is stuck, connect the RS-232 ports on PC and the rear panel of NVR with the RS-232

cable.

2) Open the Super Terminal, and execute the command of “ping 192.168.0.0 –l 1472 –f” (the IP address

may change according to the real condition), and check if there exists packet loss.

Simultaneously press Ctrl and C to exit the ping command.

2. Verify the frame rate is real-time frame rate.

Select “Menu > Record > Parameters > Record”, and set the Frame rate to Full Frame.

3. Check if the fault is solved by the above steps.

If it is solved, finish the process.

If not, please contact the engineer from our company to do the further process.



Live view stuck when video output remotely via the Internet Explorer or platform software.

Possible Reasons:

a) Poor network between NVR and IP camera, and there exists packet loss during the transmission.

b)Poor network between NVR and PC, and there exists packet loss during the transmission.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Hikvision DS-7716NI-E4 Seite 209

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Hikvision DS-7716NI-E4

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info