505753
19
Zoom out
Zoom in
Vorherige Seite
1/40
Nächste Seite

Using the Remote Control
Quick start
Turning your TV on and off
To turn your TV on: Connect the TV to an AC power outlet and an external antenna, then turn on the power via
switch located below the front right hand side of unit. A few seconds later an image will appear on the screen.
Use the setup wizard select your state and press [OK], then press [OK] again to start the turning process.
Turning off to standby mode: Press [Power Standby ] on the back RHS panel or on the remote control to
switch to standby mode. You can activate the unit again by pressing [Power Standby ].
Power indicator: Light indicates standby mode. There will be no light when the power switch is in the off
position.
NOTE:
Turn the power switch off when you do not intend to use the TV for long periods, for example overnight. Remove
the connection from the wall power outlet if you do not intend to use the unit for longer periods, for example if
you plan to be away a few days. Wait at least 5 seconds after turning off if you want to re-start the TV.
Selecting the video source
Select the video source depending on the video device you have connected to your TV.
To select the video source:
Press [Source] . When the list of video sources appears, press [/] to select the source, then Press [OK] to
connect.
[A/D]button:Press the[A/D] button to switch between the Analog/ Digital TV signal input.
Adjusting the volume
To adjust the volume:
Press [VOL+/VOL- ] to increase or decrease the volume. Press [Mute] to turn the sound off. Press [Mute]
again to turn the sound back on.
Changing channels
To change channels:
Press [CH+/CH-] to go to the next higher or lower channel. Or, Press the number buttons to select a channel.
For example, to select channel 12, press [1], then [2]. Or, press [Last] to go to the last viewed channel.
Selecting the sound mode
To select the sound mode:
Press the [Sound] button to select between 5 different pre-adjusted sound modes:
Standard, Music,movie, Speech, and User (configurable mode). The User mode preserves your preferred
sound settings after using the Equalizer available under the Sound submenu.
19

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Hisense HL42K316PZL3D wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info