Bedienungsanleitung Hisense HSLC10629HDI (Seite 20 von 26) (Englisch)

474122

Zoom out

Zoom in

Vorherige Seite

1/26

Nächste Seite

Controlling the Audio

The Audio [Menu, Audio,...] submenu contains all controls necessary to adjust audio

to your suit your needs and preferences.

AVC - 'Automatic Volume Control' (Only supported in Analogue transmission)

Lessens the gap in audio volume between the networks.

With the Digital Audio (PCM, 5.1 CH Audio) effect, you can enjoy higher quality audio.

(Supported via Optical digital audio Out)

In addition to the usual Volume and channel Balance there is also a TruSurround XT effect

which adds impressive multi-directional effect to the sound.

A 5 band audio Equalizer allows fine control on the frequency response of this unit.

You can adjust individually each band and that configuration will be automatically saved

under User [SOUND, User] audio settings. Each band (100 Hz, 330Hz, 1 KHz, 3.3 KHz

and10 KHz) can be considered as a selective volume control which only adjusts a

fraction of audio frequency spectrum.

The sound Equalizer can also be easily configured for most frequent situations by

pressing the [SOUND] button in your remote controller.

Preset settings are provided for User, Music, Standard and Voice conditions.

Standard mode delivers a flat frequency response, which preserves the natural

characteristics of the original sound. In Music mode the extremes of low and high

frequencies are accentuated to enhance musical instruments reproduction. The opposite

effect is accomplished in Voice mode where very low and high frequencies are attenuated

to improve the reproduction and intelligibility of the human voice.

TruSurround XT setting also gives a higher quality audio effect. It has three options:

1, TruSurround XT : gives the impression of surround sound.

2, TruBass : add's bass or bottom end to the audio.

3, Dialogue Clarity: increases speech clarity of the audio output.

While you're listening to music or watching a movie, you can adjust your TV to your personal

preferences.

There is also a direct way to select by pressing the [I/II] button on the remote

control. Press the [P+/-] to select the item of Digital/Analog Audio OSD, and press [OK]

button to confirm it.

[Fig. 1]

[Fig. 2]

Sound output

Audio

Equalizersettings

:Move : Chan ge : Back : Ex it AllMENU EXIT

: : : Back : Exit AllChange Move MENU EXIT

330Hz 1KHz 3.3KHz 10KHz100Hz

0 0 0 0 0

TruSurround XT ON

TruBass

Dialog Clarity

TruSurround XT

TruSurround XT Settings:

Audio

Equalizer Settings

Headphone configure

: Move OK/ : Enter EXIT/MENU: Exit

Balance

TruSound XT

AVC Off

Audio

Balance

Headphone configure

Volume

AVC PCM

Mute Off

MONO

STEREO

DUAL II

NICAM MONO

NICAM STEREO

NICAM DUAL I

NICAM DUAL II

DUAL I

Analog Audio

: Move OK : Select

Audio

Equalizer Settings

Headphone configure

: Move OK/ : Enter EXIT/MENU: Exit

Balance

TruSound XT

DigitalAudio PCM

:Move : Chan ge : Back : Ex it AllMENU EXIT

[Fig. 2]

[Fig. 1]

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Hisense HSLC10629HDI Seite 20

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info