Bedienungsanleitung Hisense pdp4212 (Seite 11 von 19) (Englisch)

140790

Zoom out

Zoom in

Vorherige Seite

1/19

Nächste Seite

Press <Display> button on the remote control to display the present channel number, but it will also disappear 3

seconds after your pressing.

Display channel number

Press the <Still> button on the remote control to snapshot the present picture.

Press this button again to return to normal watching.

Use <Still> button

Press the <Recall> button on the remote control repeatedly to alternate between the present channel and the

previous channel.

Use <Recall> button

You can select the picture mode fromamong three preset modes and one user-set

mode.

Press the < P.mode> button on the remote control repeatedly to select the desired

picture mode.

Select picture modes

You can select the sound mode from among three preset modes and one user-set

mode.

Press the <S.mode> button on the remote control repeatedly to select the desired

sound mode.

Select sound modes

Adjust Volume

When menu is not displayed on the screen, Press the <VOL->or<VOL+>button on the remote control to adjust the

volume level. Push the <Volume up> or <Volume down> Key to adjust the volume level also.

To select a channel : Press the channel numbers in series to select channel directly.

Press the button 1, and 1_ _ will display on the top right corner of the screen,

then press the button 2, 12_ will display, press the button zero, you can enjoy the program of channel 120.

For example, to seclect channel 120,

Select channels by numbers

Bright

Normal

Soft

User

Speech

Normal

Music

User

- 9 -

NOTE:1) When you changing the channel, the sound state, colour system state& sound system state graphics can be

displayed below the channel number. There are 3 sound states in this TV. If the sound is mono, the graphics

is , If the sound is stereo, the graphics is . If the sound is NICAM dual I/II, the graphics is . But the

colour system state & sound system state is you preset the state

When you changing the channel, the sound of current channel will be firstly changed to stereo or NICAM dual

according to the sound state of current channel. You can press the I/II button on the remote control to change

current sound type.

Select channels by <CH+> or <CH->

In TV source, You can use <CH+> or <CH-> on the remote control to change channels.< ndicates channel

number increase; < indicates channel number decrease.

You can use <Chanel up> or <Chanel down> on the control board to change channels.<Chanel up> indicates channel

number increase;<Chanel down> indicates channel number decrease.

CH+> i

CH->

Press the< Zoom> button on the remote control to adjust the screen aspect ratio.

Several aspect ratio you can select: 16:9 , 4:3, zoom1 ,zoom2 etc.

Use <Zoom> button

Press <Mute> button on the remote control Mute sound of your set .

Press this button again to quit Mute mode.

Mute function

Using the TV features

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Hisense pdp4212 Seite 11

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info