Bedienungsanleitung Hitachi 32PD5200 (Seite 18 von 68) (Englisch)

48355

Zoom out

Zoom in

Vorherige Seite

1/68

Nächste Seite

AV1 AV2

RGB 1 RGB 2

AV3

MUTE VOL

VOL

AV4

AUTO PinP

SIZE RECALL

ID SET

ID SET button

ID button

AUTO button

Using the Menu Screen

(On-screen display system)

When the MENU button is pressed, the adjustment menu

screen will be displayed; from there, PC signal adjustment

and setting is possible by using the SELECT button,

ADJUST button and OK button.

• Refer to - concerning the adjustment items and the

settings.

Example: Selecting the Picture screen

1. Press the MENU button to display the Main Menu

screen.

2. Press the OK button to display the Picture Menu

screen. (Use the and SELECT buttons to select

other items.)

3. Use the and SELECT buttons to select the item to

be adjusted and then use the and ADJUST

buttons to adjust (example: Contrast).

• Press the RETURN button to return to the previous screen.

• If there is no operation for a period of one minute, the

Adjustment Menu screen will be closed automatically.

Picture

Contrast : + 31

Brightness : – 31

Colour : 0

Hue : + 31

Picture Enhancement : Off

Colour Temperature : Normal

Colour Temp.Adjust

Reset Reset

Select Return Exit

OPERATING INSTRUCTIONS (continued)

Independent Operation of

Multiple Monitors (ID No)

Setting the ID No. of the remote control allows separate

control of up to a maximum of seven monitors.

Remote control ID No. 2 (initially ID no. 1) can be set by

pressing the ID SET button for 2 sec. or more while

holding down the ID button. The number will be

incremented (2•••6

➔

2) when this button pressed

continuously.

The ID remote control is operated by pressing the

various buttons while holding down the ID button;

Operation is possible only when the remote control and

monitor ID nos. are the same.

• The remote control can be operated normally by pressing the

various remote control buttons without holding down the ID button.

• Set the monitor using the ID No. of Function MENU.

Automatic Adjustment of

Screen Position and the Clock

Adjustment of the screen to a position suitable for the PC

signal and the clock adjustment can be performed

automatically by pressing the AUTO button of the remote

control.

* Depending on the signal, satisfactory adjustment may not be

possible in some cases. In such case, adjust by referring to the

Setup Menu item.

ID Number

Monitor [ 1 ]

R/C [ 1 ]

Monitor ID no.

Remote control ID no.

The remote control ID no. can be

checked by pressing the ID SET button

while holding down the ID button.

Perform this adjustment for each input (RGB1 or RGB2) and for

each signal.

CAUTION

MENU button

OK button

SELECT/ADJUST

buttons

RETURN buttons

Picture

Audio

Timer

Function

Setup

Language

Select

OK Set

Contrast + 31

Next / Prev Adjust Return

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Hitachi 32PD5200 Seite 18

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Hitachi 32PD5200

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info