Bedienungsanleitung Hitachi 37LD8600 (Seite 21 von 36) (Englisch)

63981

Zoom out

Zoom in

Vorherige Seite

1/36

Nächste Seite

- 20 -

Connect Peripheral

Equipment

There is a wide range of audio and video

equipment that can be connected to your TV.

The following connection diagrams show

you where the different (Optional) equipment

should be connected at the rear side of the

TV.

High Definition

Your Hitachi LCD Television is capable of

displaying High Definition pictures from de-

vices such as a High Definition Satellite Re-

ceiver or DVD Player. These devices must

be connected via the HDMI socket (EXT-5) or

Component Socket (EXT-3). These sockets

can accept either 720p or 1080i signals.

Via The Scart

LCD TV has 2 Scart sockets. If you want to

connect peripherals (e.g. video, decoder,

etc.) which have Scart sockets to the TV, use

SCART 1 or SCART 2 inputs.

If an external device is connected via the

Scart sockets, the TV will be switched to AV

mode automatically.

Via Aerial Input

If you want to connect to your TV, peripherals

like video recorders or decoders, but the de-

vice you want to connect does not have a

Scart socket, you should connect it to the

Aerial input of the TV.

If the VCR is connected via Aerial input it

is suggested to use Programme 0.

Decoder

Cable TV offers you a wide choice of pro-

grams. Most of them are free, others are to

be paid for by the viewer. This means that

you will need to subscribe to the broadcast-

ing organisation whose programmes you

wish to receive. This organisation will supply

you a corresponding decoder unit to allow

the programmes to be unscrambled.

For further information ask your dealer. See

also the booklet supplied with your decoder.

Connect a decoder with an aerial socket

to the TV

 Connect the aerial cable.

Connect a decoder without an aerial

socket to the TV

 Connect the decoder to the TV with a Scart

cable to SCART 1.

TV And Video Recorder

 Connect the aerial cables.

Better picture quality can be obtained if you

also connect a Scart cable to SCART sock-

ets.

Playback NTSC

To use this option you can;

 Connect an NTSC VCR player to a Scart

socket at the rear side of the TV.

 Connect an NTSC VCR player to RCA Jacks

at the rear side of the TV.

Then, press the

button to select appro-

priate source.

Copy Facility

Source selection for VCR recording.

 Select Feature menu.

 Select Ext-2 Out by pressing

button.

 Select a source to copy the picture from that

source.

Search For And Store The Test

Signal Of The Video Recorder

 Unplug the aerial cable from the aerial

socket of your video recorder.

 Switch on your TV and put the video recorder

on the test signal. (See the booklet for your

video recorder.)

 Enter the Install menu and select search.

 Search for the test signal of your video re-

corder in the same way as you searched for

and stored the TV signals. Store the test sig-

nal under programme number 0.

01-ENG-3730W-CLE967 UK-HITACHI 37 INCH TFT-TRIDENT-(LG)-50090848.p65 21.07.2006, 17:5320

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Hitachi 37LD8600 Seite 21

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Hitachi 37LD8600

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info