Bedienungsanleitung Hitachi 43HBT62 (Seite 12 von 27) (Englisch)

646610

Zoom out

Zoom in

Vorherige Seite

1/27

Nächste Seite

English - 8 -

TV and Operating Buttons (depending on the model)

Standby/On

Source

Programme +/-

Volume +/-

Note: Press “ ” and “ ” buttons at the

same time to view main menu.

-or-

1. Up direction

2. Down direction

3. Programme/

Volume / AV

/ Standby-On

selection switch

Note: You can move

the switch, upward or

downward to change

the volume. If you want

to change channels,

press the middle of the switch once (Position 3)

and then move upward or downward. If you press

the middle of the switch once more, source OSD

will be displayed. If you press the middle of the

switch and hold about a few seconds, the TV will

switch to standby mode. Main menu OSD cannot

be displayed via control buttons.

-or-

1. Standby On/Off button

2. TV/AV button

3. Programme Up/Down buttons

4. Volume Up/Down buttons

Power Connection

After unpacking, allow the TV set to reach the ambient

room temperature before you connect the set to the

mains.

Power Cable Connection:

IMPORTANT: The TV set is designed to operate on

220-240V AC, 50 Hz socket.

Plug the power cable to the mains socket outlet. Leave

at least 10mm space around the TV set.

Antenna Connection (depending on the model)

Connect the aerial or cable TV plug to the AERIAL

INPUT (ANT) socket or satellite plug to the SATELLITE

INPUT (LNB) socket located on the back of the TV.

Satellite and Cable connection are dependent on

the model.

USB Connection

You can connect USB devices to your TV by using

the USB inputs of the TV. This feature allows you to

display/play JPG, MP3 and video les stored in a USB

stick. It is possible that certain types of USB devices

(e.g. MP3 Players) may not be compatible with this

TV. You should back up your les before making

any connections to the TV set in order to avoid any

possible data loss. Note that manufacturer will not be

responsible for any le damage or data loss. Do not

pull out USB module while playing a le.

CAUTION: Quickly plugging and unplugging USB

devices, is a very hazardous operation. Especially,

do not repeatedly quickly plug and unplug the drive.

This may cause physical damage to the USB player

and especially the USB device itself.

Side View Usb Memory

Second USB is optional, depending on the model.

IMPORTANT: The TV should be switched off while

plugging or unplugging a USB device. Plug your USB

devices to the USB input of the TV. You can connect a

usb device to your TV by using the USB input of the TV.

Note: It is possible certain types of hard disk drives are

not supported.

Installing the Batteries to the Remote

Lift the cover on the back of the remote gently. Insert

two AAA batteries. Make sure the (+) and (-) signs

match (observe correct polarity). Place the cover back

on. Remote range is approximately 7m/23ft.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Hitachi 43HBT62 Seite 12

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Hitachi 43HBT62

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info