Bedienungsanleitung Hitachi 49HBT62 (Seite 19 von 28) (Englisch)

683778

Zoom out

Zoom in

Vorherige Seite

1/28

Nächste Seite

English - 15 -

• Sound may be coming from only one speaker. Check

the balance settings from sound menu.

Remote control - no operation

• The batteries may be exhausted. Replace the

batteries.

Input sources - can not be selected

• If you cannot select an input source, it is possible

that no device is connected. If not;

• Check the AV cables and connections if you have

tried to connect a device.

Recording unavailable

To record a programme, you should rst connect a

USB disk to your TV while the TV is switched off.

You should then switch on the TV to enable recording

feature. If you cannot record, try switching off the TV

and then re-inserting the USB device.

USB is too slow

If a “USB disk writing speed too slow to record”

message is displayed on the screen while starting a

recording, try restarting the recording. If you still get

the same error, it is possible that your USB disk does

not meet the speed requirements. Try connecting

another USB disk.

Connectivity Functions (depending on the model)

To configure wired/wireless settings please

refer to the Network Settings section in the

System>Options Menu.

Connecting TV to a Home Network

Connectivity feature allows the TV to connect to the

home network wired or wirelessly. You can use this

networking system to connect to the Internet Portal

or to access photo, video and audio les that are

stored on a media server connected to the network

and play/display them on the TV.

Wired connection

Connect the TV to the modem/router via a LAN

cable (not supplied). Select Network Type as Wired

Device in Network Settings menu.

Broadband ISP

connection

LAN (ethernet)

cable

LAN input on the rear

side of the TV

Wireless connection

IMPORTANT: If your TV does not have built-in wi

feature, “Veezy 200” USB dongle is required to use

wireless network features.

To connect the TV to the home network wirelessly

just select Network Type as Wireless Device in

Network Settings menu. The TV will search for

available networks. Select the desired network and

press OK. If the TV has a built-in WLAN system

there is no need for additional devices to connect to

a wireless network.

For models with built-in WLAN system:

Broadband

ISP

connection

TV (Built-In WLAN system)

For models without built-in WLAN system:

Broadband

ISP

connection

Wireless LAN

adaptor

USB inputs

on the rear left

side of the TV

About Using Connectivity Feature

PC/HDD/Media Player or any other devices that are

compatible should be used with wired connection for

higher playback quality.

Install Nero Media Home software (http://www.nero.

com/mediahome-tv) to your PC to use it as a media

server.

For models without built-in wi system, connect the

wireless adaptor to one of the USB inputs of the TV.

While using the wireless connection type, consider

that the TV cannot connect to the networks with

hidden SSID.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Hitachi 49HBT62 Seite 19

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Hitachi 49HBT62

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info