Bedienungsanleitung Hitachi BL36200 (Seite 13 von 84) (Alle Sprachen)

616686

Zoom out

Zoom in

Vorherige Seite

1/84

Nächste Seite

English

NOTE

Note that there are USB devices that cannot be used.

1. Check to conﬁ rm that the power switch is oﬀ .

Check to conﬁ rm that the power switch on the switch

panel is not illuminated.

2. Check to conﬁ rm that the switch on the USB device

to be connected is oﬀ .

Plugging the USB device in adapter with the switch set

at on may result in unexpected operations, leading to

injury.

3. Connect the USB cable. (Fig. 10)

Peel back the rubber cover and plug a USB cable that

matches the device and is available on the open market

as far as it will go into the USB terminal.

4. Switch on the main switch to the Back

Pack Power

Supply and the power switch.

Switch on the main switch to the Back Pack Power

Supply. Then switch on the power switch on the switch

panel to illuminate the power indicator in green and

commence supplying DC5V power to the USB device

connected.

5. Removing the USB cable.

Disconnect the USB cable from USB terminal after use

and then seal the USB terminal with the rubber cover.

MAINTENANCE AND INSPECTION

WARNING

Always make sure that the power switch is oﬀ and that

the adapter is disconnected from the cordless power

tool and the main switch turned oﬀ when carrying out

inspections and cleaning, and when storing the Back

Pack Power Supply.

1. Transport (Fig. 11)

Either loop the shoulder strap over your shoulder, place

the Back Pack Power Supply on your back, or use the

carrier handle when moving the Back Pack Power

Supply from place to place.

Do not carry the Back Pack Power Supply with the

adapter, adapter cable or switch cable wrapped around

the legs.

CAUTION

○ When picking up the Back Pack Power Supply, hold

it by the shoulder strap or carrier handle and lift it up

gently. Never pick it up with any of the cables.

Failure to observe this may result it in being dropped,

leading to injury or damage.

○ Check to conﬁ rm that the M5 screws (4 screws) and the

knob bolts (2 bolts) that attach the carrier are not loose

before transporting or moving the Back Pack Power

Supply. Also make sure that the carrier strap is ﬁ rmly

attached.

Failure to observe this may result it in being dropped,

leading to injury or damage.

2. Inspecting the mounting screws

Regularly inspect all mounting screws and ensure that

they are properly tightened. Should any of the screws

be loose, retighten them immediately. Failure to do so

could result in serious hazard.

3. Cleaning

NOTE

Do not use a washing machine.

Failure to observe this may result in damage and color

fading.

Soak a cloth in soapy water, wring out all excess

moisture and then wipe it.

Never use gasoline, thinner, benzene or kerosene as

this may dissolve the plastic.

4. Storing the Back Pack Power Supply after use

WARNING

○ Attach the cover to the adapter when storing it to

prevent short circuits. (Fig. 12)

Short circuits caused by conductive objects coming

into contact with the adapter terminals may result in

overheating or the outbreak of smoke or ﬁ re.

○ Do not store the Back Pack Power Supply close to

naked ﬂ ames.

Failure to observe this may result in overheating or the

outbreak of ﬁ re.

○ Do not store in front of the house or in other locations

where it may be subject to rain, or in locations with high

humidity.

○ Do not store in locations containing volatile substances

that have the risk of igniting or exploding.

CAUTION

○ Do not store within easy reach of children or where it

can be easily removed.

○ Do not store in locations subject to drastic temperature

changes or in direct sunlight.

Fully recharge the Back Pack Power Supply if it is to be

stored for long periods of time (three or more months.)

Also, recharge it once every year if it is to be stored for

more than one year.

If the Back Pack Power Supply is stored for long periods

of time with little remaining capacity, it may result

in it being impossible to recharge it or in reduced life

expectancy.

Disconnect all cordless power tools from the Back Pack

Power Supply.

When storing cordless power tools and accessories,

store them in a safe, dry location.

5. Service parts list

CAUTION

Repair, modiﬁ cation and inspection of Hitachi Power

Tools must be carried out by a Hitachi Authorized

Service Center.

This Parts List will be helpful if presented with the tool to

the Hitachi Authorized Service Center when requesting

repair or other maintenance.

In the operation and maintenance of power tools, the

safety regulations and standards prescribed in each

country must be observed.

MODIFICATIONS

Hitachi Power Tools are constantly being improved

and modiﬁ ed to incorporate the latest technological

advancements.

Accordingly, some parts may be changed without prior

notice.

NOTE

Due to HITACHI’s continuing program of research and

development, the speciﬁ cations herein are subject to

change without prior notice.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Hitachi BL36200 Seite 13

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info