Bedienungsanleitung Hitachi C 12YA (Seite 2 von 43) (Deutsch, Englisch, Französisch, Italienisch, Portugiesisch, Spanisch)

506001

Zoom out

Zoom in

Vorherige Seite

1/43

Nächste Seite

1.3 SAFETY AND RULES

The machine was designed and built according to the

Community Directives in force: 2006/42/EC, 2006/95/EC,

2004/108/EC.

The enclosed CE Declaration of conformity, togheter with

the CE mark on product, essentially comprise and are

an integral part of the machine: both guarantee product

conformity with the aforesaid safety Directives.

1.4 RECOMMENDED AND NOT RACCOMENDED

USE

The most advanced technologies have been used to design

and manufacture the mitre-saw. It is suitable to cut wood,

aluminium and plastics used by professionals, craftsmen

and expert hobbyists alike.

SUITABLE USE

To cut:

– HARD AND SOFT, DOMESTIC AND EXOTIC WOOD

BOTH LONGITUDINALLY AND TRANSVERSALLY

and with appropriate adjustments (specific blade and

clamps):

– PLASTICS

– ALUMINIUM AND ALUMINIUM ALLOYS

UNSUITABLE USE

Do not cut:

– FERROUS MATERIALS, STEEL AND CAST IRON OR

ANY OTHER MATERIAL NOT MENTIONED ABOVE AND

IN PARTICULAR FOODSTUFFS.

– CIRCULAR SAW WITHOUT PROTECTION.

1.5 STANDARD SAFETY PROCEDURE

– Remove all cuttings from the work surface ensuring it is

completely clean.

– Use the machine in dry areas and away from inﬂ ammable

substances or gas.

– Do not use the machine outdoors in adverse weather

or environmental conditions (explosive atmospheres,

storms or rain).

– Wear appropriate clothing: do not wear loose-sleeved

garments or objects such as scarves, chains or bracelets

which may get caught in machine’s moving parts.

– Always use personal protective gear: standard accident-

prevention goggles, well-ﬁ tting gloves, earphones or

earplugs and headgear to cover hair if necessary.

– Handle the power supply cable with care: do not use it

to lift the machine or to pull the plug out of the socket.

Keep it away from cutting edges, oily patches and high

temperatures.

– Keep the machine out of reach of children: do not allow

them to approach or touch the machine.

– When in need, only use approved power supply cable

extensions.

– Beware of electriﬁ cation: avoid all contact with earthed

objects such as pipes, radiators and refrigerators.

– “WARNING! When using electric tools basic safety

precautions should always be followed to reduce the

risk of ﬁ re, electric shock and personal injury including

the following.

Read all these instructions before attempting to operate

this product and save these instructions”.

– Store iole topos

• When not in use, tools should be stored in a dry locked-

up place, out of reach of children .

– Do not force the tool

• It will do the job better and safer at the rate for which

it was intended.

1 INTRODUCTION TO USE

Before using your mitre-saw, please read this instruction

manual very carefully in order to become familiar with the

machine and its recommended use.

Do not lose this manual as it is an essential part of the

machine itself. We recommend you always refer to it in

order to operate the machine in the best and safest way

possible.

Keep the manual with the machine and handy at all times

to be consulted whenever necessary.

Use the machine exclusively for the uses speciﬁ ed below,

follow manual instructions carefully and never try to force

or to tamper with it, or to use it inappropriately.

1.1 SAFETY INFORMATION AND NOTES

Do not underestimate the symbols “HAZARD” and

“CAUTION” in this manual.

Symbols and notes precede all hazardous operations both

to give safety messages and to draw the users’ attention

to danger and also to outline the appropriate behaviour to

adopt to avoid such events.

The three symbols used and relative wording are the

following:

WARNING: high risk behaviour which could be

severely harmful.

CAUTION: behaviour which could be moderately

harmful or damage objects.

NOTE: the notes preceded by this symbol are of a

technical nature and simplify use.

1.2 SPECIFICATION

Blade Range

Hole x Thickness

Mitre cutting Angle

Bevel cutting Angle

Compound cutting Angle

Machine Dimension

(Length x Width x Height)

Upper Work Surface

(Dimension work surface)

Voltage

Frequency

Power Input

No-Load Speed

Weight (net)

Standard accessory

300mm – 305mm

30mm x 1.8 mm - 2 mm

Rifht and Left 0° - 45°

Left 0° - 45°

Mitre (Right and Left)

0° - 45°

Bevel (Left) 0° - 45°

580mm x 540mm x 650mm

475mm x 325mm

(460 mm x 305 mm)

230 V ~

50 Hz

1500 W

2850 min -1

22,5 Kg

Hex bar wrench x 2

Stopper x 1

Guard x 1

Push stick x 1

ORIGINAL INSTRUCTIONS

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Hitachi C 12YA Seite 2

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info