Bedienungsanleitung Hitachi C2844S (Seite 16 von 22) (Englisch)

54150

Zoom out

Zoom in

Vorherige Seite

1/22

Nächste Seite

ENGLISH - 11 -

Sleep Timer

As you enter the Feature menu, SLEEP TIMER will be the first

selected option. Use 

 or   button to change the Sleep

Timer values between OFF, 0:15:00, 0:30:00, 0:45:00, 1:00:00,

1:15:00, 1:30:00, 1:45:00 and 2:00:00.

It is displayed on the upper right of the screen. If sleep timer is

activated it is displayed with the TV status and erased with it

after 3 seconds.

If there is left only one minute of the down counting of the timer,

it is displayed automatically on the upper right of the screen,

and stayed there until finishing. Then TV goes automatically to

stand-by.

Child Lock

You can use this feature to prevent children turning on TV or

changing programs or adjustments etc. without remote con-

trol.

The CHILD LOCK feature can be set by 

 or   button to

either ON or OFF. When OFF is selected, there will be no differ-

ence in the operation of your TV. When ON is selected, the TV

can only be controlled by the remote control handset. In this

case, the front panel buttons (except the Switch On/Off button)

will not work.

Selecting Menu Language

Menu language can be chosen by pressing 

 or   button

on LANGUAGE item.

AV-2 OUTPUT

From AV-2 OUTPUT, either TV or AV-1 can be given. TV or

AV-1 can be chosen by pressing 

 or   button on "AV-2

OUTPUT".

To Store Settings

In Feature menu all settings are stored automatically.

Install Menu

 To enter the Install menu directly, press the BLUE button, or

 Press " " button, now you are in Main menu. In the Main

menu, select INSTALL. using 

 or   button. Then enter

the Install menu pressing 

 or   button.

Selecting Programme

To select programme number, you can use 

 or   button,

Digit Buttons or The Double Digit button with digit buttons.

Selecting Band

BAND, can be chosen either,

 VHF1, VHF3 or UHF by   or   button.

Standard

The "Standard" setting is fixed to "I". You cannot

change this item's setting.

Selecting Search

To start the search process, press 

 button for forward

search or 

 button for backward search. SEARCH item

blinks during search process, since the process is stopped

or signal is found. During search process the semi-transpar-

ent menu background becomes "BLUE". To stop the search

process 

 or   button must be pressed again.

Selecting Fine Tuning

You can use the Fine Tuning process for fine adjustment (af-

ter coarse adjustment), if you are not happy about the image

on the screen.

Use 

 or   button on FINE TUNING item, until getting the

best image on the screen.

To Store Settings

Press   or   button on STORE option to store Install menu

settings.

ENG-(C2844S)-2850M-3040-AK37-ST1P-VST-50041887.p65 26.06.2003, 11:0411

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Hitachi C2844S Seite 16

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info