Before installing your TV please read the following important notes:
If you intend placing this TV into a cabinet or a wall alcove, please ensure there is at least a 100mm (10cm) gap to the sides, rear and top of the
Television. This is to allow for adequate ventilation during TV operation.
Don t allow soft furnishings such as curtains to be draped over the TV whilst in operation.
Never place the TV on to a carpet during normal operation - this could obstruct ventilation slots on the base of the TV. Always place the TV on a flat
surface , or if supplied, the stand accessory.
Failure to observe the above guidelines could result in serious overheating of your TV
, or in extreme cases, even fire.
TV Installation
TV Installation
TV only installation.
Installation via a VCR.
Aerial (RF) Lead
Aerial (RF) Socket
*A scart lead should be fitted between your TV and VCR to enhance your picture and sound quality. Scart leads are essential if you have a
stereo TV and VCR and wish to obtain stereo sound from your equipment. These leads can be purchased from your Hitachi dealer or any
good High Street electrical retailer.
Connecting your TV to the mains socket.
(Please read the Safety Notes in the TV Safety Section
with reference to unattended operation).
Insert Plug and
Switch on
5
5
