Bedienungsanleitung Hitachi C28W440N (Seite 17 von 22) (Englisch)

54237

Zoom out

Zoom in

Vorherige Seite

1/22

Nächste Seite

GB - 16 -

0.25 MHz steps using “ “ or “ ” buttons, you can

select the 224.25MHz .When you type and select the

frequency, the corresponding station will be displayed.

• To store the st ation to the programme number se-

lected, select “Store” option using “ “ or “ ” but-

ton and then press “ “ or “ ” button to store it.

• Now as you had selected the “Frequency Search”,

the tuning mode of the program is stored as Fre-

quency Search Mode.

Manual Setup

The Manual Setup Menu displays the programme

names and numbers. You can use this menu to delete

or insert a channel and to auto store the programmes.

This menu can be accessed directly via the “ ” INFO

button provided the TV is not already displaying a menu.

The Manual Setup Menu can be reached via Install in

the Main Menu.

Press the Blue button on the remote control handset this

will display the Install menu then select Manual Setup

using the “ “ or “ ” buttons. Next press either of the

“ “ or “ ” buttons.

When you have entered the Manual Setup all the pro-

gramme names and numbers will be displayed on the

screen. Programme number one (1) will be in red and

flashing while all the others are in white. By using the

“ “ or “ ” buttons you can move the flashing display

to select another programme number and name.

Pressing the RED button on the remote control will re-

tune the channel on the flashing programme number.

To delete a channel from a programme number:

• To move the red flashing display on to the channel

you want to delete.

• Press the YELLOW BUTTON on the remote con-

trol. Now the channel will be deleted and all the other

channels below this programme number will be

moved up one position.

To insert a channel into a programme number:

• Move the red flashing display on to the channel you

want to insert.

• Press the RED BUTTON on the remote control.

That channel will now be displayed on the screen.

• Move the red flashing display on to the required pro-

gramme number position.

• Press the GREEN BUTTON on the remote control

this will insert the channel shown on the screen into

that programme number position. The channel that

was occupying that position will be moved down one

and the position from where the selected channel

was moved from will be filled by the channel below.

APS (Automatic Programming System)

The APS menu appears when you switch on your TV for

the first time.

APS automatically tunes your TV into the TV channels

received in your area.

If you wish to run the APS at another time you will have

to do the following.

• Press the BLUE button on the remote control hand-

set this will display the Install menu then select

MANUAL SETUP using the “ “ or “ ” buttons.

Next press either of the “ “ or “ ” buttons.

• You are now in the MANUAL SETUP menu.

• Press the BLUE button on the remote control hand-

set. This will select AutoTune and start APS. (Press-

ing the TV button on the remote control can stop this

operation.)

When APS has finished a table of all the channels tuned

in will be displayed on the screen. If you are not happy

with the line up of the channels this can be changed.

Please refer to the section on how to delete and insert

a channel from a programme number located in the

MANUAL SETUP section.

• If you do not want the stations to be stored automati-

cally, cancel APS pressing “TV” button.

• If you want to continue, then first by pressing the “ “

or “ ” buttons, come to the “Tuning Mode ” item

and select the mode at which your TV will run the

APS. If you select Channel Tuning Mode, APS will run

according to Channel Tuning Mode and will auto-

search according to the Channel numbers of the sta-

tions in your area. If you select Frequency T uning

Mode, APS will run according to Frequency Tuning

Mode and will auto-search according to the frequen-

cies of the stations in your area. Selected tuning

mode will appear in the highlightened bar at the bot-

tom of the WARNING menu.

• Then, after selecting the Tuning Mode if you want to

start APS, by pressing the “ “ or “ ” buttons,

come to the “ Start” item and by pressing “ “ or

“ ” button start the APS.

• When you start APS the below menu will appear on

the screen.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Hitachi C28W440N Seite 17

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info