Bedienungsanleitung Hitachi C28W460N (Seite 6 von 24) (Englisch)

54241

Zoom out

Zoom in

Vorherige Seite

1/24

Nächste Seite

- 5 -

Connect Peripheral Equipment

There is a wide range of audio and video equipment that

can be connected to your TV.

The connection diagrams on the previous page show

you where the different equipment should be connected

at the back or the front side of the TV.

Via the Euroconnector

Your TV set has one, two or three Euroconnector sock-

ets. If you want to connect peripherals (e.g. video, de-

coder, etc.) which have Euroconnectors, to your TV, use

optional EXT.1 or EXT.2 inputs.

If an external device is connected via Euroconnector

sockets TV is switched to AV mode automatically. If

the signal is RGB then the RGB OSD indicator is dis-

played on the screen.

Via Aerial Input

If you want to connect to your TV, peripherals like video

recorders or decoders, but the device you want to con-

nect does not have Euroconnector, you should connect

it to the Aerial input of your TV set.

If the VCR is connected via antenna input it is sug-

gested to use the Programme 0.

Decoder

Cable TV offers you a wide choice of programs. Most of

them are free, others are to be paid for by the viewer.

This means that you will need to subscribe to the broad-

casting organisation whose programmes you wish to

receive. This organisation will supply you a correspond-

ing decoder unit to allow the programmes to be un-

scrambled.

For further information ask your dealer. See also the

booklet supplied with your decoder.

Connect a decoder with an aerial socket to

the TV

 Connect the aerial cable.

Connect a decoder without an aerial socket

to the TV

 Connect the decoder to your TV with a eurocable to

EXT.1 or EXT.2. When your decoder has a

Euroconnector you can obtain better picture quality if

you connect a eurocable to EXTERNAL.

TV and Video Recorder

 Connect the aerial cables.

Better picture quality can be obtained if you also con-

nect a eurocable to EXTERNAL sockets.

Playback NTSC

Connect NTSC VCR player to Euroconnector at the back

of the TV.

Connect NTSC VCR player to RCA Jack at the front of

the TV.

Then, press AV button to select EXT-1, RGB, EXT-2,

F-AV or SVHS.

Copy Facility

Source selection for VCR recording.

 Select Features Menu in the MENU.

 Select EXT-2 OUTPUT source pressing   or  

button.

Search for and store the test signal of the

video recorder

 Unplug the aerial cable from the aerial socket of your

video recorder.

 Switch on your TV and put the video recorder on the

test signal. (See the handbook for your video recorder.)

 Enter the Fine Tuning via the Install menu.

 Search for the test signal of your video recorder in the

same way as you searched for and stored the TV sig-

nals. See Tuning, Search and Store TV channels. Store

the test signal under programme number 0.

 Replace the aerial cable in the aerial socket of your

video recorder once you have stored the test signal.

Camera and Camcorder

To connect to Front-AV input (F-AV):

Connect your camera or camcorder at the front side of

your TV.

 Connect your equipment to the TV via VIDEO (yel-

low), AUDIO R (red) and AUDIO L (white) inputs. You

should connect the jacks to the input in the same

colour.

To connect to SVHS input:

Do not use SVHS and F-AV inputs at the same time,

the signals will interfere and it can result a poor pic-

ture.

Connect your camera or camcorder at the front or rear

side of your TV.

 Connect your equipment to the TV via SVHS input

and audio inputs of F-AV inputs by using SVHS cables.

Connect the decoder to the video recorder

Some video recorders have a special euroconnector for

decoder.

 Connect a eurocable to the euroconnector of your de-

coder and to the special euroconnector of your video

recorder. See also the handbook of your video recorder.

 To connect your video recorder to the TV, see TV and

Video Recorder section.

If you want to connect more equipment to your TV, con-

sult your dealer.

Connecting Headphones

Use the stereo headphone socket on the lower right

side of your TV, to connect headphones.

2853W-1244UK-ENG-ST7P-AK45-PLL-FS-CLED-50051552.p65 13.07.2004, 10:545

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Hitachi C28W460N Seite 6

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info