Bedienungsanleitung Hitachi C28WF540N (Seite 6 von 21) (Englisch)

54275

Zoom out

Zoom in

Vorherige Seite

1/21

Nächste Seite

GB - 5 -

Via the SCART connector

Your TV set has two SCART connector sockets. This is for

the connection of equipment which is fitted with a SCART

socket e.g. video machine or satellite receiver.

AV2S Mode

If the equipment connected to your TV set supports S-Video

(Y/C) output from SCART, you can have a better picture quali-

ty by selecting AV2S mode and connecting your equipment

to the EXT2 terminal of TV. See your equipment's booklet to

check if your equipment has such feature.

RGB mode

If an equipment can output the RGB signals, connect it to the

AV-1 (EXT1) terminal.

 Select the RGB mode to watch images from that equip-

ment.

 When not in the RGB mode, turn the RGB signals output

equipment off.

S-VHS

If the equipment connected to your TV set supports S-Video

(Y/C) output from S-VHS connector, you can have a better

picture quality by selecting S-VHS mode and connecting

your equipment to the S-VHS terminal of TV.

S-VHS and FRONT AV will share the same audio sockets. In

fact there will be only one pair audio channel as audio left and

audio right.

Via Aerial Input

If the equipment you want to connect to your TV e.g. video

machine or satellite receiver does not have a SCART socket,

you should connect it to the aerial (ANT) socket on your TV.

Decoder

Cable TV offers you a wide choice of programs. Most of them

are free, others are to be paid for by the viewer. This means

that you will need to subscribe to the broadcasting organiza-

tion whose programmes you wish to receive. This organiza-

tion will supply you with a corresponding decoder unit to al-

low the programmes to be unscrambled.

For further information ask your dealer. See also the booklet

supplied with your decoder.

Connecting a decoder with an aerial socket to the

 Connect the aerial cable.

Connecting a decoder without an aerial socket to

the TV

 Connect the decoder to your TV with a SCART lead to

EXT1 or EXT2. When your decoder has a SCART connec-

tor you can obtain better picture quality if you connect a

SCART lead to EXTERNAL.

 Then select the appropriate AV mode by pressing the AV

button.

TV and Video Recorder

 If your video machine has a SCART socket please connect

it to the TV using a SCART lead. Your TV should also be

connected to your video machine using the aerial RF output

socket.

Please note using a SCART lead will produce better qualitiy

pictures.

Playback of NTSC recordings

This TV can display video recordings played back in the

NTSC 3.58 / 4.43 mode.

Connect a VCR which is capable of playing a NTSC recording

to the SCART socket located on the back of your TV or the

phono or RCA sockets located on the front of the TV.

Then press the AV button to select either AV-1, AV-2,

AV2S, AV-3, S-VHS or RGB.

Copy Facility

Source selection for VCR recording.

Select TV Setup Menu in the Install Menu.

 Select AV-2 OUTPUT source pressing 

 or   but-

ton.

Search for and store the test signal of the video

recorder

 Unplug the aerial cable from the aerial socket ANT of

your video recorder.

 Switch on your TV and put the video recorder on the test

signal. (See the handbook for your video recorder.)

 Enter the Tuning menu via the Install menu.

 Search for the test signal of your video recorder in the same

way as you searched for and stored the TV signals. See

Tuning, Search and Store TV channels. Store the test signal

either under programme number 0 or between 55 and 99.

 Replace the aerial cable in the aerial socket ANT of your

video recorder once you have stored the test signal.

Camera and Camcorder

To connect to Front-AV input:

Connect your camcorder to the front of your TV.

 Connect your equipment to the TV via VIDEO (yellow), AU-

DIO R (red) and AUDIO L (white) inputs. You should con-

nect the jacks to the input of the same colour.

Back-AV output:

Connect your camcorder at the back side of your TV.

 Connect your equipment to the TV via VIDEO, AUDIO R

and AUDIO L inputs. You should connect the jacks to the

input in the same colour. Back AV output outputs only the

information coming from the ANT (aerial) socket, so you can

not output external sources from Back AV output. For this

purpose you should use AV-2 OUTPUT.

Connect the decoder to the video recorder

Some video recorders have a special SCART connector for

decoder.

 Connect a SCART lead to the SCART connector of your de-

coder and to the special SCART connector of your video re-

corder. See also the handbook of your video recorder.

 To connect your video recorder to the TV, see TV and Video

Recorder section.

If you want to connect more equipment to your TV, consult

your dealer.

Connecting Headphones

Use the stereo headphone socket (HP) to connect head-

phones. This socket is located on the front / right hand side

of the television.

IB-ENG-PLL-STEREO-AK33-UK-(C28WF540N-C32WF540N-28&3217W).p65 29.08.2002, 13:065

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Hitachi C28WF540N Seite 6

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info