Bedienungsanleitung Hitachi C28WF540N (Seite 14 von 21) (Englisch)

54275

Zoom out

Zoom in

Vorherige Seite

1/21

Nächste Seite

GB - 13 -

Tilt:

This feature is used to rotate the picture. Sometimes the

Earths own magnetic field may cause the picture to rotate. If

this happens, you can correct the picture tilt using this fea-

ture.

Install Menu

The Install Menu consist of the Tuning, Manual Setup and

TV Setup submenus.

Tuning Menu

 Press the  MENU button, this takes you to the main

menu, then select Install using the 

 or   buttons.

 Press the 

MENU button, you are now in the main

menu. In the main menu, select INSTALL, using either of

the 

 or   buttons. (To enter the Install menu directly

just press the Blue button on the remote control hand set.)

 The Tuning submenu is selected by using the 

 or  

buttons and entered by pressing either of the 

 or  

buttons.

Automatic Search

 Programme is the first item on the list in the Tuning Menu.

It is entered by pressing either of the 

 or   buttons.

 Then decide the programme number where you want the

station to be stored by pressing either of the 

 or  

buttons. (You may instead type in the programme number

using the digit buttons.)

 Next select Band by using the 

 or   buttons and us-

ing the 

 or   buttons select the band to be

searched. (VHF-L, VHF-H or UHF)

 Select Search With the   or   buttons. Search can

be made either forward, by pressing 

 button or back-

ward by pressing the 

 button.

 When the tuning stops and the tuned station is not the de-

sired one, you can continue searching by pressing either of

the 

 or   buttons again.

 When the desired station is tuned, select STORE using the



 or   buttons and store it to the programme number

you previously selected by pressing either of the 

 or



 buttons.

 To stop searching before a station is found, press the re-

verse direction button (for example when searching forwards

press the backward direction button).

To name a Programme

 First select the programme number you want to name.

 Then select the name option using the 

 or   but-

tons.

 Next press either of the 

 or   buttons to set the

position of the letter to be changed and then press either of

the 

 or   buttons to change that letter.

 Then select and change the remaining letters and when fin-

ished select STORE using the 

 or   buttons and

store using the either of the 

 or   buttons.

Direct Channel Access

 If you know the broadcast band and channel number of the

station you want to tune, you do not need to make search;

select Band, using 

 or   button in the TUNING

menu. Select the band of the station, pressing 

 or



 button. Then select Channel pressing   or  

button. Press 

 or   button to find the channel num-

ber or directly type it using the digit buttons. As you change

the channel numbers the corresponding stations will be dis-

played.

I : C01-C17, C21-C73

To store the station to the programme number selected, se-

lect STORE option using 

 or   button and then press



 or   button to store it.

Now as you had selected the Channel, the tuning mode of

the program is stored as Channel Search Mode.

Note : Channel Search Tuning Mode uses a channel table.

The channels and stations at the table may vary from table to

table and from country to country. Each channel has an ex-

act frequency on the table.

 Frequency Search Tuning Mode does not use a channel

table and it is slower than Channel Search Tuning Mode.

 Channel Search Tuning Mode is recommended for the

countries which uses standard channel table.

 Frequency Search Tuning Mode recommended for the coun-

tries which uses non-standard channel table and recom-

mended to use instead of VST TUNERs.

Fine Tuning

In areas where the reception is weak the quality of the picture

and sound may be poor. In such cases, the picture and

sound quality can sometimes be improved by fine-tuning.

Fine Tuning is done as follows:

IB-ENG-PLL-STEREO-AK33-UK-(C28WF540N-C32WF540N-28&3217W).p65 29.08.2002, 13:0713

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Hitachi C28WF540N Seite 14

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info