Bedienungsanleitung Hitachi C28WF560N (Seite 9 von 24) (Englisch)

54279

Zoom out

Zoom in

Vorherige Seite

1/24

Nächste Seite

- 8 -

Before Switching on your TV

Power connection

IMPORTANT: The TV set is designed to operate on 220-

240V AC, 50 Hz.

 After unpacking, allow the TV set to reach the ambi-

ent room temperature before you connect the set to

the mains.

Connections to the RF input socket

 Connect the aerial or cable TV plug to the RF input

socket located at the back of the TV and connect the

cable plug coming out from the TV out socket located

at the devices (VCR, DVB etc.) to this socket as well.

How to connect other devices

IMPORTANT: Switch off the TV before connecting any

external device.

Sockets for external connections are at the back and

front of the TV. For connection of other devices via

Euroconnector refer to the manuals of the related de-

vices.

Inserting batteries in the remote control

handset

 Place the batteries in the right directions as seen be-

low.

 Remove the battery cover located on the back of the

handset by gently pulling upwards from the indicated

part.

 Insert two AAA (R03) or equivalent type batteries in-

side.

 Replace the battery cover.

NOTE: Remove batteries from remote control handset

when it is not to be used for a long period. Otherwise it

can be damaged due to any leakage of batteries.

Switching the TV ON/OFF

To switch the TV on

Your TV will switch on in two steps:

1- Press the power button located on the front of the

TV. Then the TV switches itself to standby mode and

the RED LED located below the TV turns on.

2- To switch on the TV from stand-by mode either:

Press a digit button on the remote control so that a

programme number is selected,

or,

Press Programme Up or Down buttons on the front of

the TV or on the remote control, so that last switched

off programme is selected.

By either method, TV will switch on and the RED LIGHT

will turn GREEN.

To switch the TV off

 Press the stand-by button on the remote control, so

the TV will switch to stand-by mode and the GREEN

LIGHT will become RED,

or,

Press the power button located on the front of the TV,

so the TV will switch off and the GREEN LED will turn

off.

Operating the TV

You can operate your TV both using the remote

control handset and onset buttons.

A.P.S. (Automatic Programming System)

The A.P.S. menu will appear when you first switch on

your TV for the first time.

A.P.S. automatically programmes your TV, according

to the transmission of programme systems in your area.

 First come to the Country item and select your coun-

try, according to which the TV will automatically pro-

gram the TV, from the available countries, by pressing



 or   button.

 By pressing the 

 or   buttons, come to the

Language item and select the language in which the

menus of the TV will appear. You can see the available

languages by pressing 

 or   button. As soon

28-3217W-1244UK-ENG-ST7P-AK45-BSI-PLL-FS-RF-TILT-CLED-50047944.p65 13.07.2004, 11:258

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Hitachi C28WF560N Seite 9

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info