Bedienungsanleitung Hitachi C32W460N (Seite 10 von 18) (Englisch)

54287

Zoom out

Zoom in

Vorherige Seite

1/18

Nächste Seite

ENGLISH - 9 -

Or you can directly change the volume settings using VOL+

(to increase) or -VOL (to decrease) button.

Setting Balance

It allows adjusting the distribution between the left and right

speakers.

 Using 

 or   button select Balance.

 Press 

 button to change balance rightward.

 Press 

 button to change balance leftward.

When balance control is in mid position, the cursor is displayed

with the two reciprocal arrows.

Selecting Mode

 Using 

 or   button select Mode.

 Press 

 or   button to change Mode.

You can choose MONO, STEREO or DUAL (I-II) mode, only if

the selected channel supports that mode.

You can also change sound mode directly pressing I-II button

on your remote control.

In case of bilingual broadcast (Dual Sound), you can select

original or dubbed language using mode option.

Setting AVL

Automatic Volume Limiting (AVL) function normalises sound to

obtain fixed output level between programs, having different

sound levels. Pressing 

 or   button will turn on and off this

feature.

Setting Effect

You can use this feature to switch the sound effect on and off.

Pressing 

 or   button will turn on and off this feature. If the

current sound system is MONO and the sound effect is set ON,

then the sound will be heard as if it is STEREO. If the current

sound system is STEREO, switching this effect on will make the

sound deeper. Switching it off will make no change in MONO

and STEREO.

Equalizer

To enter Equalizer sub-menu, select Equalizer using 

 or  

button, then enter Equalizer menu pressing 

 or   button.

In MODE item there are five predefined and one user defined

options. These are USER, CLASSIC, JAZZ, ROCK, POP and

FLAT. The predefined options can not be changed by the user.

If you change one of the frequency values of the predefined

options, the MODE is switched automatically to USER option.

The USER option may be adjusted by the user.

The 5 items below the MODE are available to adjust the sound

settings in 5 frequency values: 120 Hz, 500 Hz, 1.5 kHz, 5 kHz

and 10 kHz. To change the values of 5 frequency options, se-

lect one of the options by 

 or   button, and then press  

to increase the value, or 

 to decrease the value. In mid

position, cursor is displayed with the two reciprocal arrows.

To store the Equalizer settings, press   or   button on

STORE option.

During the store process all the items are stored, moreover, the

USER mode information would not be lost. In other words, when

the user mode is selected again, after storing the MODE with

one of the predefined options, the user definde frequency val-

ues would be set.

To Change Headphone Sound Settings

Pressing   or   button on HEADPHONE, enter the Head-

phone menu. This is a sub-menu of Sound menu, and all op-

tions in this menu are working as the same in the Sound menu.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Hitachi C32W460N Seite 10

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Hitachi C32W460N

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info