Bedienungsanleitung Hitachi C32WF540N (Seite 15 von 21) (Englisch)

54277

Zoom out

Zoom in

Vorherige Seite

1/21

Nächste Seite

GB - 14 -

Go to the Tuning menu and using the   or   buttons

select Fine Tuning. Then press and hold the 

 button will

cause the fine tuning to be carried out in the forwards direc-

tion, pressing the 

 button with cause the tuning to be

carried out in the opposite direction. When you are satisfied

with the reception of the transmission store it. To store, se-

lect STORE using the 

 or   buttons and store it by

pressing either of the 

 or   buttons.

 When you select "Frequency" , the display of the Tuning

menu will be as below :

 As "Frequency" is selected, TV will search according to

the channel frequencies.

 With the 

 or   button, select Search. Search can be

made either forward, pressing 

 button or backwards,

pressing 

 button.

 The search will be done with steps of 0.25MHz. in each

step.

 If the tuned station is not the desired one, you can continue

searching pressing 

 or   button again.

 When the desired station is tuned, select Store using



 or   button and store it to the programme number

you selected pressing 

 or   button.

 Now as you had selected the "Frequency", the tuning

mode of the program is stored as Frequency Search Mode.

Direct Frequency Access

 If you know the broadcast band and the channel frequency

of the station you want to tune, you do not need to make

search; select Frequency, using 

 or   button in the

Frequency Mode Tuning Menu. You can type the first 3 dig-

its of the frequency using the digit buttons, and then you

can select the decimal part of the frequency by using 



or 

 buttons with 250kHz steps. For example if you

want to tune the station at frequency 224.25 MHz; first you

can directly type 224. The bar at bottom of the menu will

show 224.00 . Then by increasing or decreasing with 0.25

MHz steps using 

 or   buttons, you can select the

224.25MHz .When you type and select the frequency, the

corresponding station will be displayed.

 To store the station to the programme number selected, se-

lect Store option using 

 or   button and then

press 

 or   button to store it.

 Now as you had selected the Frequency, the tuning

mode of the program is stored as Frequency Search Mode.

Manual Setup

The Manual Setup Menu displays the programme names

and numbers. You can use this menu to delete or insert a

channel and to auto store the programmes. This menu can

be accessed directly via the 

 INFO button provided the

TV is not already displaying a menu.

The Manual Setup Menu can be reached via Install in the

Main Menu.

Press the Blue button on the remote control handset this will

display the Install menu then select Manual Setup using

the 

 or   buttons. Next press either of the   or



 buttons.

When you have entered the Manual Setup all the pro-

gramme names and numbers will be displayed on the screen.

Programme number one (1) will be in red and flashing while

all the others are in white. By using the 

 or   buttons

you can move the flashing display to select another pro-

gramme number and name.

Pressing the RED button on the remote control will retune the

channel on the flashing programme number.

To delete a channel from a programme number:

 To move the red flashing display on to the channel you want

to delete.

 Press the YELLOW BUTTON on the remote control. Now

the channel will be deleted and all the other channels below

this programme number will be moved up one position.

To insert a channel into a programme number:

 Move the red flashing display on to the channel you want to

insert.

 Press the RED BUTTON on the remote control. That chan-

nel will now be displayed on the screen.

 Move the red flashing display on to the required programme

number position.

 Press the GREEN BUTTON on the remote control this will

insert the channel shown on the screen into that programme

number position. The channel that was occupying that posi-

tion will be moved down one and the position from where the

selected channel was moved from will be filled by the chan-

nel below.

APS (Automatic Programming System)

The APS menu appears when you switch on your TV for the

first time.

APS automatically tunes your TV into the TV channels re-

ceived in your area.

If you wish to run the APS at another time you will have to do

the following.

 Press the BLUE button on the remote control handset this

will display the Install menu then select MANUAL SETUP

using the 

 or   buttons. Next press either of the



 or   buttons.

 You are now in the MANUAL SETUP menu.

 Press the BLUE button on the remote control handset. This

will select AutoTune and start APS. (Pressing the TV button

on the remote control can stop this operation.)

IB-ENG-PLL-STEREO-AK33-UK-(C28WF540N-C32WF540N-28&3217W).p65 29.08.2002, 13:0714

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Hitachi C32WF540N Seite 15

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info