7
connecting to the mains socket
aerial, satellite and VCR installation
set-up and tuning in
VHS video equipment should be connected to the AV1 scart socket located at the rear of your TV. A
dedicated program number may be assigned to AV1, allowing you easier access to view external
equipment broadcasts. How to assign an AV signal to dedicated program numbers is explained in
signal source sntry.
satellite and VCR installation
Please Note
- If you have not already done so, please read television safety
before connecting your television and external equipment.
insert plug...
...and switch on
*A scart lead should be fitted between your TV and VCR to enhance your picture and sound quality. Scart leads
are essential if you have a stereo TV and VCR and wish to obtain stereo sound from your equipment. These
leads can also be purchased from your Hitachi dealer or any good High Street electrical retailer.
connect VCR ‘out’ to analogue
TV socket ‘in’
marked
scart leads are an optional extra*
aerial wall socket
receiving aerial
Video
Cassette
Recorder
(this should be plugged
into a mains socket)
connect aerial
connection lead to
the analogue‘in’ socket
marked
1
3
Satellite
Decoder
(this should be
plugged
into a mains
socket)
connect Satellite ‘out’ to VCR
socket ‘in’ marked
2
Before you switch on your television, it is important that the external speakers supplied
with your television are connected. This can be seen in the sections
centre speaker and sub-woofer/external left and right speakers.
