Bedienungsanleitung Hitachi c6bu2 (Seite 32 von 42) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Türkisch, Schwedisch, Norwegisch, Finnisch)

382534

Zoom out

Zoom in

Vorherige Seite

1/42

Nächste Seite

English

ADDITIONAL SAFETY INSTRUCTIONS FOR

ALL SAWS WITH RIVING KNIFE

a) Use the appropriate riving knife for the blade

being used.

For the riving knife to work, it must be thicker than

the body of the blade but thinner than the tooth

set of the blade.

b) Adjust the riving knife as described in this

instruction manual.

Incorrect spacing, positioning and alignment can

make the riving knife ineffective in preventing

kickback.

c) Always use the riving knife except when plunge

cutting.

Riving knife must be replaced after plunge cutting.

Riving knife causes interference during plunge

cutting and can create kickback.

d) For the riving knife to work, it must be engaged

in the workpiece.

The riving knife is ineffective in preventing

kickback during short cuts.

e) Do not operate the saw if riving knife is bent.

Even a light interference can slow the closing rate

of a guard.

PRECAUTIONS ON USING CIRCULAR SAW

1. Do not use saw blades which are deformed or

cracked.

2. Do not use saw blades made of high speed steel.

3. Do not use saw blades which do not comply with

the characteristics specified in these instructions.

4. Do not stop the saw blades by lateral pressure

on the disc.

5. Always keep the saw blades sharp.

6. Ensure that the lower guard smoothly and freely.

7. Never use the circular saw with its lower guard

fixed in the open position.

8. Ensure that the retraction mechanism of the guard

system operates correctly.

9. The saw blades body must be thinner than the

riving knife and the width of cut, or kerf (with

teeth set) must be greater than the thickness of

the riving knife.

10. Never operate the circular saw with the saw blade

turned upward or to the side.

11. Ensure that the material is free of foreign matters

such as nails.

12. The riving knife should always be used except

when plunging in the middle of the workpiece.

13. For models C6U2 and C6BU2, the saw blades

range should be from 165 mm to 162 mm.

For models C7U2 and C7BU2, the saw blades

range should be from 190 mm to 185 mm.

14. For models C6BU2 and C7BU2, be careful of brake

kickback.

C6BU2 and C7BU2 models features an electric

brake that functions when the switch is released.

As there is some kickback when the brake

functions, be sure to hold the main body securely.

15. Sparks can sometimes appear caused by braking

operation when the switch is turned off since

C6BU2 and C7BU2 models employ electric brakes.

Be informed, however, that this phenomenon is

not a machine trouble.

16. For models C6BU2 and C7BU2, when the brake

becomes ineffective, replace the carbon brushes

with new ones.

17. Disconnect the plug from the receptacle before

carrying out any adjustment, servicing or

maintenance.

SPECIFICATIONS

*Be sure to check the nameplate on product as it is subject to change by areas.

Model C6U2 C6BU2 C7U2 C7BU2

Voltage (by areas)*

(110 V, 230V)

Cutting Depth

90° 54 mm 66 mm

45° 39 mm 48 mm

Power

Input*

1100 W 1200 W

No-Load Speed

5500 min

-1

Weight (without cord) 3.5 kg 4.0 kg

STANDARD ACCESSORIES

(1) Saw Blade (mounted on tool ) ............................... 1

Dia. 165 mm .......... C6U2, C6BU2

Dia. 190 mm .......... C7U2, C7BU2

(2) Hex. bar wrench ....................................................... 1

(3) Guide .......................................................................... 1

(4) Wing-bolt ................................................................... 1

(5) Lever (short type) ..................................................... 1

(6) Dust collector ............................................................ 1

Standard accessories are subject to change without

notice.

OPTIONAL ACCESSORIES (sold separately)

(1) Washer (A) ... for 16

mm (Hole dia. of saw blade)

... for 30 mm (Hole dia. of saw blade)

(2) Guide Rail Adapter (See Fig. 13)

Optional accessories are subject to change without notice.

APPLICATION

Cutting various types of wood.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Hitachi c6bu2 Seite 32

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info