Bedienungsanleitung Hitachi C7BMR (Seite 9 von 54) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Portugiesisch, Spanisch)

506013

Zoom out

Zoom in

Vorherige Seite

1/54

Nächste Seite

English

c) Lower guard should be retracted manually only for

special cuts such as “plunge cuts” and “compound

cuts”. Raise lower guard by retracting handle and as

soon as blade enters the material, the lower guard

must be released.

For all other sawing, the lower guard should operate

automatically.

d) Always observe that the lower guard is covering the

blade before placing saw down on bench or floor.

An unprotected, coasting blade will cause the saw to

walk backwards, cutting whatever is in its path.

Be aware of the time it takes for the blade to stop

after switch is released.

PRECAUTIONS ON USING CIRCULAR SAW

1. Do not use saw blades which are deformed or

cracked.

2. Do not use saw blades made of high speed steel.

3. Do not use saw blades which do not comply with

the characteristics specified in these instructions.

4. Do not stop the saw blades by lateral pressure

on the disc.

5. Always keep the saw blades sharp.

6. Ensure that the lower guard moves smoothly and

freely.

7. Never use the circular saw with its lower guard

fixed in the open position.

8. Ensure that the retraction mechanism of the guard

system operates correctly.

9. Never operate the circular saw with the saw blade

turned upward or to the side.

10. Ensure that the material is free of foreign matters

such as nails.

11. For model C7BMR, the saw blades range should

be from 180 mm to 185 mm.

12. For model C7BMR, be careful of brake kickback.

Model C7BMR features an electric brake that

functions when the switch is released. As there

is some kickback when the brake functions, be

sure to hold the main body securely.

13. Sparks can sometimes appear caused by braking

operation when the switch is turned off since

model C7BMR employs electric brakes. Be

informed, however, that this phenomenon is not

a machine trouble.

14. For model C7BMR, when the brake becomes

ineffective, replace the carbon brushes with new

ones.

15. Disconnect the plug from the receptacle before

carrying out any adjustment, servicing or

maintenance.

STANDARD ACCESSORIES

(1) Saw Blade (Dia. 185 mm) (mounted on tool ) ..... 1

(2) Box wrench ............................................................... 1

(3) Guide .......................................................................... 1

(4) Wing-bolt ................................................................... 1

(5) Lever (short type) ..................................................... 1

(6) Dust collector ............................................................ 1

(7) Machine screw M4 × 12 .......................................... 1

Standard accessories are subject to change without notice.

OPTIONAL ACCESSORIES (sold separately)

⅜ Washer (A)

............... for 20 mm (Hole dia. of saw blade)

............... for 30 mm (Hole dia. of saw blade)

Optional accessories are subject to change without notice.

APPLICATION

Cutting various types of wood.

Voltage (by areas)* (110 V, 230 V, 240 V)

Cutting Depth

90° 60 mm

45° 47 mm

Power Input* 1610 W / 1600 W

No-Load Speed 5800 min

–1

Weight (without cord) 4.8 kg

* Be sure to check the nameplate on product as it is subject to change by areas.

SPECIFICATIONS

PRIOR TO OPERATION

1. Power source

Ensure that the power source to be utilized con-

forms to the power requirements specified on the

product nameplate.

2. Power switch

Ensure that the power switch is in the OFF position.

If the plug is connected to a receptacle while the

power switch is in the ON position, the power tool

will start operating immediately, which could cause

a serious accident.

3. Extension cord

When the work area is removed from the power

source, use an extension cord of sufficient thickness

and rated capacity. The extension cord should be

kept as short as practicable.

4. Prepare a wooden workbench (Fig. 1)

Since the saw blade will extend beyond the lower

surface of the lumber, place the lumber on a

workbench when cutting. If a square block is utilized

as a workbench, select level ground to ensure it

is properly stabilized. An unstable workbench will

result in hazardous operation.

01Eng_C7BMR_WE 11/26/07, 6:19 PM8

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Hitachi C7BMR Seite 9

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info