Bedienungsanleitung Hitachi CL28W440AN (Seite 13 von 22) (Englisch)

54239

Zoom out

Zoom in

Vorherige Seite

1/22

Nächste Seite

GB - 12 -

Setting Balance:

• Using “

“ or “ ” button select Balance.

• Press “ ” button to change balance rightwards.

• Press “ ” button to change balance leftwards.

Setting Sound Effect:

You can use this feature to switch on and off sound

effect. Pressing “ “ or “ ” button will turn on and off

this feature. If the current sound system is MONO and

the sound effect is set ON, then the sound will be heard

as if it is STEREO. If the current sound system is STE-

REO, switching this effect on will make the sound

deeper. Switching it off will make no change in MONO

and STEREO.

To Store the Settings:

• Using “

“ or “ ” button select Store. Press “ “ or

“

” button to store current sound settings. The

stored values will be valid for all the programmes.

To Change Headphone Sound Settings:

When using headphones, you can change the sound

setting in the headphone Menu. To do this select head-

phones using the “

“ or “ ” buttons and then enter the

headphone menu by pressing either of the “

“ or “ ”

buttons.

Setting Headphone Volume:

• As you enter the Headphone sound menu, Volume

will be the first selected option.

• Press “ ” button to increase volume.

• Press “ ” button to decrease volume.

Setting Headphone Sound Mode:

• Using “

“ or “ ” button select Mode.

Pressing “

“ or “ ” button will change the current

sound mode. (e.g.: If the current sound mode is stereo,

it will be stereo or visa versa).

In case of bilingual broadcast, you can select original or

dubbed language again using mode menu. So when

somebody listens to the original language from the loud-

speakers, somebody else can listen to the dubbed lan-

guage from headphone.

To Store the Settings:

• Use the “

“ or “ ” buttons to select store. Press

either the “

“ or “ ” buttons to store the current

sound settings.

• These stored values will be valid for all the program-

mes.

Picture Menu

To change picture settings:

• To make changes to the picture settings you will

have to enter the picture menu.

There are two ways of entering the picture menu:

• You can enter the Picture Menu directly by pressing

the Green “

” button.

• You can press the “ MENU” button, which takes

you to the main menu, then select picture using the

“

“ or “ ” buttons and then enter the picture menu

pressing either of the “

“ or “ ” buttons.

Setting Brightness:

• As you enter the picture menu, Brightness will be the

first selected option.

• Press “

” button to increase brightness.

• Press “ ” button to decrease brightness.

Setting Colour:

• Using “

“ or “ ” button select Colour.

• Press “ ” button to increase colour level.

• Press “ ” button to decrease colour level.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Hitachi CL28W440AN Seite 13

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info