Bedienungsanleitung Hitachi CL28W440AN (Seite 16 von 22) (Englisch)

54239

Zoom out

Zoom in

Vorherige Seite

1/22

Nächste Seite

GB - 15 -

• Then select and change the remaining letters and

when finished select STORE using the “ “ or “ ”

buttons and store using the either of the “ “ or

“ ” buttons.

To change Standard

(You can change this menu only between st andards

which your TV set supports.)

Pressing “ “ or “ ” button selects the Broadcast

Standard required. Then select the standard you want

pressing “ “ or “ ” button. When changing the stan-

dard this way, if the previous channel is not defined for

the new selected standard, then also the channel will be

changed to the first defined channel of that standard (For

example: When changing BG to K1 and the previous

channel is C12, after changing the standard, the chan-

nel will be C4, because the first defined channel of stan-

dard K1 is C4). After that, if it is returned to the previous

standard back, the channel will not be changed to the

previous one anymore (That means, in the example

above, when it is returned from K1 to BG again, the

channel will not change to C12 anymore and keep C4).

Defined channels for different standards are given as

following:

B/G : C01-C83, S01-S41

D/K : C01-C12, C21-C69, S01-S19, S22-S41

I* : C01-C17

I** : C01-C17, C21-C73, S01-S19, S22-S41

L/L’ : C01-C76, S01-S41

K1 : C04-C09

* U.K. I (UHF)

** IRELAND I (VHF, UHF)

Note : Channel Search Tuning Mode uses a channel

table. The channels and stations at the table may vary

from table to table and from country to countr y. Each

channel has an exact frequency on the table.

• Frequency Search Tuning Mode does not use a

channel table and it is slower than Channel Search

Tuning Mode.

• Channel Search Tuning Mode is recommended for

the countries which uses standard channel table.

• Frequency Search Tuning Mode recommended for

the countries which uses non-standard channel table

and recommended to use instead of VST TUNERs.

Direct Channel Access

• If you know the broadcast band and channel number

of the station you want to tune, you do not need to

make search; select Band, using “ “ or “ ” button

in the TUNING menu. Select the band of the station,

pressing “ “ or “ ” button. Then select Channel

pressing “ “ or “ ” button. Press “ “ or “ ”

button to find the channel number or directly type it us-

ing the digit buttons. As you change the channel num-

bers the corresponding stations will be displayed.

To store the station to the programme number selected,

select STORE option using “ “ or “ ” button and

then press “ “ or “ ” button to store it.

Now as you had selected the “Channel Search”, the

tuning mode of the program is stored as Channel

Search Mode.

Fine Tuning

In areas where the reception is weak the quality of the

picture and sound may be poor. In such cases, the pic-

ture and sound quality can sometimes be improved by

fine-tuning. Fine Tuning is done as follows:

Go to the Tuning menu and using the “ “ or “ ” but-

tons select Fine Tuning. Then press and hold the “ ”

button will cause the fine tuning to be carried out in the

forwards direction, pressing the “ “ button with cause

the tuning to be carried out in the opposite direction.

When you are satisfied with the reception of the trans-

mission store it. To store, select STORE using the “ “

or “ ” buttons and store it by pressing either of the

“ “ or “ ” buttons.

• When you select "Frequency Search" , the display

of the Tuning menu will be as below :

• As "Frequency Search" is selected, TV will search

according to the channel frequencies.

• With the “ “ or “ ” button, select Search. Search

can be made either forward, pressing “ ” button or

backwards, pressing “ ” button.

• The search will be done with steps of 0.25MHz. in

each step.

• If the tuned station is not the desired one, you can

continue searching pressing “ “ or “ ” button

again.

• When the desired station is tuned, select “Store ”

using “ “ or “ ” button and store it to the program-

me number you selected pressing “ “ or “ ” but-

ton.

• Now as you had selected the "Frequency Search",

the tuning mode of the program is stored as Fre-

quency Search Mode.

Direct Frequency Access

• If you know the broadcast band and the channel fre-

quency of the station you want to tune, you do not

need to make search; select Frequency, using “ “

or “ ” button in the Frequency Mode Tuning Menu.

You can type the first 3 digits of the frequency using

the digit buttons, and then you can select the decimal

part of the frequency by using “ “ or “ ” buttons

with 250kHz steps. For example if you want to tune

the station at frequency 224.25 MHz; first you can di-

rectly type 224. The bar at bottom of the menu will

show 224.00 . Then by increasing or decreasing with

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Hitachi CL28W440AN Seite 16

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info