Bedienungsanleitung Hitachi CMP4211 (Seite 54 von 59) (Englisch)

635113

Zoom out

Zoom in

Vorherige Seite

1/59

Nächste Seite

Selected characters Setup hint

Scart Output

TV Monitor

TV:AV4 (Scart) output will be fixed as TV signal output.

Monitor:AV4 (Scart) output can view the image as on the main unit.

But it is possible to monitor only the composite video signal from

AV1, AV2, or AV3 input that is displayed on the screen at the time.

OPERATING INSTRUCTIONS (continued)

SETUP MENU (continued)

Selected characters Setup hint

Auto Tuning

Mode

Position Direct

Select the channel entry method between position setting or direct

setting. And press the OK button to fix it.

• If [Position] is selected, the screen display will be numbers (1~199

and AV00).

• If [Direct] is selected, the screen display will be C

✱✱

at the channel

0~99 and S

✱✱

at the channel 100~199.

– –

Press the OK button and it starts the auto tuning.

Manual Tuning

Position

– –

Set the position number(0~199) or channel number(C

✱✱

, S

✱✱

) by

▼

▲

PROGRAM UP/DOWN buttons.

Frequency

– –

• If [Position] has been selected, search the frequency here by

pressing buttons.

• If [Direct] has been selected, this function will be not available

(grayed out).

Name

( :a letter)

This is used to input the name of the TV station within 5 letters. After

fixing the cursor on the first digit, select a letter by

▼

▲

SELECT

buttons and move to next digit by ADJUST button. Press the OK

button again after finished.

• Selectable letters are “0”~`”9”, ”A”~`”Z”, “+”, “–”, ” ”(blank),

”,”(comma) and ”.”(period) .

Sound System

Auto M BG

DK I

Select the sound system through the 5 different settings.

Color System

Auto PAL SECAM

NTSC3.58 NTSC4.43

Select the color system through the 5 different settings.

Skip

Off On

If this is set to On, that position will be skipped while selecting

positions by PROGRAM UP/DOWN buttons.

This is automatically set to On for those non-broadcasting channels.

Off On

If this is set to On, it helps to reduce the noise interference visible on

the screen, especially in the weaker signal reception areas.

Fine Tuning

Decreasing the frequency

data for the main tuner

Increasing the frequency

data for the main tuner.

After completing the fine-tuning, press the RETURN button to exit this

mode.

• The variable range is -56 ~ +56.

Sort

(When the Mode in Auto Tuning menu is set to [Direct], this function will be not available (grayed out).)

(A Line of position List)

– –

Press OK button at the a line that is required to change order, then

the characters will change to green. And move it up or down in the list

by pressing

▼

▲

SELECT buttons. And press OK button to complete

it. Press the RETURN button to exit.

Auto Off

Off On

If this is set to On, the power will be turned off when there is no

transmission signal and no operation for about 10 minutes in the TV

mode.

[During VIDEO signal input]

1 item is added to the Menu shown in the page .

▼

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Hitachi CMP4211 Seite 54

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info