505782
21
Zoom out
Zoom in
Vorherige Seite
1/78
Nächste Seite
21
Operating
Using the functions for the lens
ZOOM / FOCUS
Press the
ZOOM / FOCUS
button. The ZOOM / FOCUS dialog
will appear. Adjust the zoom / focus using the ◄/► button while
the dialog is displayed. Press the ▼ button to select "EXIT" on
the dialog. It nishes the OSD menu.
LENS SHIFT
Press the LENS SHIFT button. The LENS SHIFT dialog
will appear. Using the ▲/▼/◄/► buttons while the dialog
is displayed shifts the lens.
In the LENS SHIFT dialog:
Press the
DIGITAL button.
In the standby mode:
Press the LENS SHIFT and the DIGITAL buttons for 3 seconds at the same time.
CENTERING
While the lens is shifting, the menu will disappears and the icon of hourglass will
appears on screen. Shifting may take some time. Depending on the case, it may
reach one minute.
The LENS SHIFT indicator lights up or blinks in green while the lens is shifting.
Then the indicator will stop blinking and light for 3 seconds in steady green
when the centering is complete.
When the lens is located in the center already, pressing the DIGITAL button in the
LENS SHIFT dialog lights in steady green the LENS SHIFT indicator for 3 seconds.
LENS MEMORY SAVE / LOAD / CLEAR
This projector is equipped with memory functions for the lens adjustments (zoom,
focus and shift).
To display the LENS MEMORY dialog, select the LENS MEMORY on the ZOOM,
FOCUS or LENS SHIFT dialog. Then the LENS MEMORY dialog will appear.
SAVE:To save the current lens adjustments, select
a SAVE-(1-3) and press ► or ENTER button.
LOAD:To load a saved adjustments, select the
LOAD-(1-3) and press ► or
ENTER button.
When the MY BUTTON button is allocated to
the LOAD-(1-3) the memory can be loaded
without the LENS MEMORY dialog.
CLEAR:Selecting the CLEAR LENS MEMORY in the LENS MEMORY dialog
displays CLEAR LENS MEMORY dialog. Select the number to be cleared
using ▲/▼ buttons and press the ► button. The dialog to check your intention
will come out. Then press the ► button again in the dialog.
• The adjustable range of ZOOM and FOCUS
varies depending on the lens unit mounted on the
projector to maintain picture quality. Therefore ZOOM or
FOCUS adjustments may not reach the end of the bar
indicators in the dialog, and that is not a failure.
NOTE
21

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Hitachi CP-SX12000 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Hitachi CP-SX12000

Hitachi CP-SX12000 Bedienungsanleitung - Deutsch - 172 seiten

Hitachi CP-SX12000 Bedienungsanleitung - Holländisch - 172 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info