505782
49
Zoom out
Zoom in
Vorherige Seite
1/78
Nächste Seite
49
OPTION menu
Item Description
MY BUTTON
This item is to assign one of the following functions to
MY BUTTON
-(
1 to 4) on the remote control (
7).
(1) Use the ▲/▼ buttons on the MY BUTTON menu to select a MY BUTTON - (1
to 4) and press the ► button to display the MY BUTTON setup dialog.
(2) Then using the ▲/▼/◄/► buttons sets one of the following functions to the
chosen button.
• COMPUTER IN1: Sets port to COMPUTER IN1.
• COMPUTER IN2: Sets port to
COMPUTER IN2.
• BNC: Sets port to
BNC.
• HDMI: Sets port to
HDMI.
• DVI-D: Sets port to
DVI-D.
• COMPONENT: Sets port to Component
(Y, Cb/Pb, Cr/Pr).
• S-VIDEO: Sets port to
S-VIDEO.
• VIDEO 1: Sets port to
VIDEO 1.
• VIDEO 2: Sets port to
VIDEO 2.
INFORMATION: Displays the INPUT -INFORMATION- (
55) or
the NETWORK -INFORMATION- (
55) or nothing.
AUTO KEYSTONE : Performs automatic keystone distortion
correction (
47).
MY MEMORY
:
Loads one of adjustment data stored (
33)
.
When more than one data are saved, the adjustment
changes every time the MY BUTTON is pushed.
When no data is saved in memory, the dialog "No
saved data" appears.
When the current adjustment is not saved to
memory, the dialog as shown in the right appears.
If you want to keep the current adjustment, please press
the
button to exit. Otherwise loading a data will overwrite the current adjusted condition.
ACTIVE IRIS: Changes the active iris mode.
• PICTURE MODE: Changes the PICTURE MODE (
29).
FILTER RESET: Displays the lter time reset conrmation dialogue (
48).
TEMPLATE: Makes the template pattern selected to the
TEMPLATE item
(
46) appear or disappear.
P by P SWAP: Swaps the picture of right side with left side in the P by P
mode.
(
27)
LENS MEMORY-1: Loads the LENSMEMORY-1
LENS MEMORY-2: Loads the LENSMEMORY-2
LENS MEMORY-3: Loads the LENSMEMORY-3
It shifts the lens position in accordance with the memory saved for
the type of the present lens unit.
When there is no memory for the lens type, this function is ignored.
MY IMAGE: Displays the MY IMAGE menu (
59).
MY SOURCE
This item is to assign an input signals to
MY
SOURCE button on the remote control (
22).
Using the ▲/▼ buttons sets one of the input
signal.
(continued on next page)
49

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Hitachi CP-SX12000 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Hitachi CP-SX12000

Hitachi CP-SX12000 Bedienungsanleitung - Deutsch - 172 seiten

Hitachi CP-SX12000 Bedienungsanleitung - Holländisch - 172 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info