Bedienungsanleitung Hitachi CP-X2015WN (Seite 37 von 259) (Englisch)

505797

Zoom out

Zoom in

Vorherige Seite

1/259

Nächste Seite

Operating

Press POSITION button on the remote control when no menu is

indicated.

The “POSITION” indication will appear on the screen.

Adjusting the position

Use the ▲/▼/◄/► cursor buttons to adjust the picture position.

When you want to reset the operation, press RESET button on

the remote control during the operation.

To complete this operation, press POSITION button again. Even if

you do not do anything, the dialog will automatically disappear

after a few seconds.

●

When this function is performed on a video signal or an s-video signal, some image

such as an extra-line may appear at outside of the picture.

● When this function is performed on a video signal or s-video signal, the range of

this adjustment depends on OVER SCAN in IMAGE menu (

40) setting. It is not

possible to adjust when OVER SCAN is set to 10.

● If POSITION button is pressed when a menu is indicated on screen, the displayed

picture does not move its position but the menu does.

● This function is unavailable for a signal from the LAN, USB TYPE A, USB TYPE B

or HDMI port.

Press AUTO button on the remote control.

Pressing this button performs the following.

Using the automatic adjustment feature

 For a computer signal

The vertical position, the horizontal position and the horizontal

phase will be automatically adjusted.

Make sure that the application window is set to its maximum size

prior to attempting to use this feature. A dark picture may still be

incorrectly adjusted. Use a bright picture when adjusting.

 For a video signal and s-video signal

The video format best suited for the respective input signal will be selected

automatically. This function is available only when the AUTO is selected for

the VIDEO FORMAT item in the INPUT menu (

43).

The vertical position and

horizontal position will be automatically set to the default.

● The automatic adjustment operation requires approx. 10 seconds. Also please

note that it may not function correctly with some input.

● When this function is performed for a video signal, a certain extra such as a line

may appear outside a picture.

● When this function is performed for a computer signal, a black frame may be

displayed on the edge of the screen, depending on the computer model.

●

The items adjusted by this function may vary when the FINE or DISABLE is selected

for the AUTO ADJUST item of the SERVICE item in the OPTION menu (

60).

POSITION button

POSITION

ESC

RESET

ENTER

AUTO button

 For a component video signal

The vertical position and horizontal position will be automatically set to the default.

The horizontal phase will be automatically adjusted.

VIDEO

DOC.CAMERA

KEYSTONE

ASPECT

BLANK

MUTE

MY BUTTON

COMPUTER

MY SOURCE/

AUTO

MAGNIFY

PAGE

DOWN

OFF

FREEZE

࡯

㧗

VOLUME





Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Hitachi CP-X2015WN Seite 37

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Hitachi CP-X2015WN

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info