Bedienungsanleitung Hitachi CR10DL-01 (Seite 15 von 72) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Portugiesisch, Spanisch)

565948

Zoom out

Zoom in

Vorherige Seite

1/72

Nächste Seite

English

NOTE

No. 2 – No. 96 HCS blades are sold separately as

optional accessories.

2. Selection of BI-METAL blades

The BI-METAL blade numbers in Table 3 are

described on the packages of special accessories.

Select appropriate blades by referring to Table 3

and 4 below.

Table 3: Bl-METAL blades

NOTE

Nos. 101 – No. 109 Bl-METAL blades are sold

separately as optional accessories.

3. Selection of blades for other materials

Table 4

MAINTENANCE AND INSPECTION

CAUTION

Be sure to turned off the switch and remove the

battery before maintenance and inspection.

1. Inspecting the blade

Continued use of a dull or damaged blade will

result in reduced cutting efficiency and may cause

overloading of the motor. Replace the blade with

a new one as soon as excessive abrasion is noted.

2. Inspecting the mounting screws

Regularly inspect all mounting screws and ensure

that they are properly tightened. Should any of the

screws be loose, retighten them immediately. Failure

to do so could result in serious hazard.

3. Maintenance of the motor

The motor unit winding is the very “heart” of the

power tool. Exercise due care to ensure the winding

does not become damaged and/or wet with oil or

water.

4. Cleaning of the outside

When the Cordless Reciprocating Saw is stained,

wipe with a soft dry cloth or a cloth moistened with

soapy water. Do not use chloric solvents, gasoline

or paint thinner, as they melt plastics.

5. Storage

Store the Cordless Reciprocating Saw in a place in

which the temperature is less than 40°C, and out

of reach of children.

6. Service parts list

A : Item No.

B : Code No.

C : No. Used

D : Remarks

CAUTION

Repair, modification and inspection of Hitachi Power

Tools must be carried out by a Hitachi Authorized

Service Center.

This Parts List will be helpful if presented with the

tool to the Hitachi Authorized Service Center when

requesting repair or other maintenance.

In the operation and maintenance of power tools,

the safety regulations and standards prescribed in

each country must be observed.

MODIFICATIONS

Hitachi Power Tools are constantly being improved

and modified to incorporate the latest technological

advancements.

Accordingly, some parts (i.e. code numbers and/or

design) may be changed without prior notice.

GUARANTEE

We guarantee Hitachi Power Tools in accordance with

statutory/country specific regulation. This guarantee

does not cover defects or damage due to misuse, abuse,

or normal wear and tear. In case of complaint, please

send the Power Tool, undismantled, with the GUARANTEE

CERTIFICATE found at the end of this Handling instruction,

to a Hitachi Authorized Service Center.

NOTE

Due to HITACHI’s continuing program of research and

development, the specifications herein are subject to

change without prior notice.

Blade Thickness

No.

Uses

(mm)

No. 101

For cutting steel and stainless pipes

less than 60 mm in outer diameter

2.5 – 6

No. 103

For cutting steel and stainless pipes

less than 60 mm in outer diameter

2.5 – 6

No. 107

For cutting steel and stainless pipes

less than 60 mm in outer diameter

Below 3.5

No. 109

For cutting steel and stainless pipes

less than 60 mm in outer diameter

2.5 – 6

Material Material Thickness

Blade No.

to be cut quality (mm)

Iron plate Mild steel 2.5 – 10 No. 2, 101,

plate 103, 109

Below 3.5 No. 3, 107

Nonferrous Aluminium, 5 – 20 No. 2, 101,

metal Copper and 103, 109

Brass

Below 5 No. 3, 107

Systhetic Phenol resin, 10 – 50 No. 2, 4,

resin Melamine 101, 103

resin, etc.

5 – 30 No. 3, 5, 8,

107, 109

Vinyl chloride,

10 – 60 No. 2, 4,

Acrylic resin, 101, 103

etc.

5 – 30 No. 3, 5, 8,

107, 109

01Eng_CR10D_WE 6/24/09, 13:5114

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Hitachi CR10DL-01 Seite 15

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info