Bedienungsanleitung Hitachi CS33EDT (Seite 9 von 80) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Portugiesisch, Spanisch)

566210

Zoom out

Zoom in

Vorherige Seite

1/80

Nächste Seite

English

Maintenance safety

○ Maintain the unit/machine according to recommended procedures.

○ Disconnect the spark plug before performing maintenance

except for carburetor adjustments.

○ Keep others away when making carburetor adjustments.

○ Use only genuine HITACHI replacement parts as recommended

by the manufacturer.

CAUTION

Do not disassemble the recoil starter. Yo u may get a possibility

of personal injury with recoil spring.

WARNING

Improper maintenance could result in serious engine damage or

in serious personal injury.

Transpor t and storage

○ Carry the unit/machine by hand with the engine stopped and the

muﬄ er away from your body.

○ Allow the engine to cool, empty the fuel tank, and secure the

unit/machine before storing or

transporting in a vehicle.

○ Empty the fuel tank before storing the unit/machine. It is

recommended that the fuel be emptied after each use. If fuel is

left in the tank, store so fuel will not leak.

○ Store unit/machine out of the reach of children.

○ Clean and maintain the unit

carefully and store it in a dry place.

○ Make sure ignition switch is oﬀ when transporting or storing.

○ When transporting or storage, cover chain with guide bar cover.

If situations occur which are not covered in this manual, take care and

use common sense. Contact HITACHI dealer if you

need assistance.

Pay special attention to statements preceded by the following words:

WARNING

Indicates a strong possibility of severe personal injury or loss of

life, if instructions are not followed.

CAUTION

Indicates a possibility of personal injury or equipment damage, if

instructions are not followed.

NOTE

Helpful information for correct function and use.

WARNING

KICKBACK DANGER (Fig. 1)

One of the most severe dangers when working with a chain saw is

the possibility of kickback. Kickback may occur when the upper tip

of the guide bar touches an object, or when the wood closes in and

pinches the saw chain in the cut. Tip contact

in some cases may

cause a lightning fast reverse reaction, kicking the guide bar up and

back toward you. Pinching the saw chain along the top of the guide

bar may also push the guide bar rapidly back towards you. Either of

these reactions may cause you to lose control

of the saw which could

result in serious personal injury. Even though your saw has safety

built into its design, you should not rely on these safety features

exclusively. Know where your bar tip is at all times. Kickback does

occur if you allow the kickback zone (1) of the bar

to touch an object.

Do not use that area. Kickback from pinching is caused by a cut

closing and pinching the upper side of the guide bar. Study your cut

and make sure it will open as you cut through. Maintain control when

the engine is running by always keeping

a ﬁ rm grip on the saw with

your right hand on the rear handle, your left hand on the front handle

and your thumbs and ﬁ ngers encircling the handles. Always hold the

saw with both hands during operation and cut at high engine speed.

000Book_CS33EDT_WE.indb 8000Book_CS33EDT_WE.indb 8 2011/08/06 9:14:552011/08/06 9:14:55

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Hitachi CS33EDT Seite 9

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info