7
English
W ARNINGS AND SAFET Y INSTRUCTIONS
Operator safe ty
○ Alwa ys wear a safety face shield or goggles.
○ Glov es should be used when sharpening chain.
○ Alwa ys wear safety protectiv e equipment such as jacket,
trousers, gloves, helmet, boots with steel toe -c aps and non-
slip soles whenever you use a chain saw. For wor kin g in trees
the safety boots must
be suitable for climbing techniques. Do
not wear loose clothing, jewelry, shor t pants, sandals or go
barefoot.
Secure hair so it is abo ve shoulder length.
○ Do not operate this to ol when yo u are tired, ill or under the
infl uence of alcohol, drugs or medication.
○ Never let a child
or inexperienced person operate the machine.
○ Wear hearing prot ection. Pay attention to your surroundings.
Be aware of an y bysta nder s who ma y be signaling a problem.
Remove safety equipment immediately upon shutting off
engine.
○ Wear head prot ection.
○ Never star t or run the engine inside a closed room or building.
Breathing
exha ust fumes can kill.
○ For respiratory prot ection, wear a protection mask while emitting
the chain oil mist and dust from sa wdust.
○ Keep handles free of oil and fuel.
○ Keep hands away from cutting equipment.
○ Do no t grab or hold the unit by the cutting equipment.
○ When the unit
tur ned off , make sure the cutting attac hment has
stopped bef ore the unit is set down.
○ When operation is prolonged, take a break from time to time
so that you may avoid possible Hand-Arm Vibration Syndrome
(HAVS ) which is caused by vibration.
○ The opera tor must obe y the local regulations
of cutting area.
W ARNING
○ Antivibration systems do not guarantee that you will not susta in
Hand-Arm Vibration Syndr ome or carpal tunnel syndrome.
Therefore, continual end regular users should monitor closely
the condition of their hands and fi ngers. If any of the above
symptom s appear , seek medical advice immediately .
○ Long or continuous ex pos ure to high
noise levels may cause
permanent hearing impairment. Always wea r approved hearing
protection when operating a unit/machine.
○ If you are using any medical electric/electronic devices such
as a pacemaker , consult yo ur physician as well as the device
manufacturer prior to operating an y power equipment.
Unit/machine safety
○ Inspect the entire unit/machine before
each use . Replac e
damaged par ts. Chec k for fuel leaks and make sure all fasteners
are in place and securely tightened.
○ Replace parts that are cracke d, chipped or damaged in any way
before using the unit/machine.
○ Make sure the side case is properly att ached.
○ Keep oth ers away when making carburetor
adjustments.
○ Use only access ories as recommended fo r this unit/machine by
the manufacturer .
○ Never let the chain str ike an y obstacle. If the chain mak es
contact, the machine should be stopped and checked care fully.
○ Make sure the automatic oiler is workin g. Kee p the oil tank fi lled
with clean oil. Never let
chain run dry on the bar .
○ All chain saw service, other than the items listed in the operat orʼs/
ownerʼs manual, should be performed by competent chain-saw
service personnel. (For exa mpl e, if improper too ls are used to
remove the fl y wheel or if an improper to ol is used to hold
the
fl ywheel in order to remove the clutch, structural damage to the
fl ywheel could occur and could subsequently cause the fl y wheel
to burst. )
W ARNING
○ Never modif y the unit/machine in any way. Do not use your unit /
machine for an y job except that for which it is intended.
○ Never use chain saw without any safety equipment or that has
faulty safety equipment. It could result in serious personal
injury.
○ Using guide bar/chain other than
recommended by the
manufacturer which are not approved, could result in a high risk
of personal accidents or injury.
Fue l safety
○ Mix and pour fuel outdoors and where there are no sparks or
fl ames.
○ Use a container approved for fuel.
○ Do not smoke or allow smoking near fuel or
the unit /machine or
while using the unit/machine.
○ Wipe up all fuel spills before star ting engine.
○ Move at least 3 m away from fueling site before starting engine .
○ Stop engine before removing fuel cap.
○ Empty the fuel ta nk before storing the unit/machine . It is
recommended that the fuel be
emptied af ter each use. If fuel is
left in the tank, store so fuel will not leak.
○ Store unit /machine and fuel in area where fuel vapor s cannot
reach sparks or open fl ames from water heaters, electric mot ors
or switches, furnaces, etc.
W ARNING
Fue l is easy to ignit e or get exp los ion or inhale fumes, so that pay
special attention when handling or fi lling fuel.
Cutting safety
○ Do no t cut any material other than woo d or woo den objects.
○ For respirator y protection, wear an aeroso l protection mask
when cutting the woo d after insecticide has
been applied.
○ Keep others including children, animals, bystand ers and helpers
outside the ha zard zone. Stop the engine immediately if you are
approached.
○ Hold the unit/machine fi rmly with the right hand on the rear
handle and the left hand on the front handle .
○ Keep fi rm footing and balance. Do not
over-reac h.
○ Keep all par ts of yo ur body away from the mu ffl er and cut ting
attac hment when the engine is ru nning.
○ Keep Bar/Chain belo w waist level.
○ Befor e felling a tree, the operator must be accustome d to the
sawing t echniques of the chain saw .
○ Be sure to pre-plan a safe
exit from a failing tree.
○ While cutting, hold saw fi rmly with both hands with thumb fi rmly
locked around front handle, and stand with feet we ll balanced
and your body balanced.
○ Stand to the side of the sa w when cutting - never directly behind
it.
○ Alwa ys keep the spiked bumper
face to a tree , because the
chain may suddenly be drawn into a tree, if so equipped.
○ When completing a cut, be ready to hold up the units as it breaks
into clear , so it will not fol low through and cut your legs, fe et or
body , or contact an obstruction.
○
Be alert ag ainst kickback (w h en sa w kicks up and bac k at
operator) . Nev er cut with the nose of the bar .
○ When relocating to a new wo rk area, be sure to shut off the
machine and ensure that all cutting attac hments are stopped.
○ Never place the machine on the ground
when runn ing.
○ Alwa ys ensure that the engine is shut off and any cutting
attac hments have completely stopped before clearing debris or
removing grass from the cutting at tachment.
○ Alwa ys carr y a fi rs t-a id kit when operating any power
equipment.
○ Never star t or run the engine inside a closed room or
building
and/or near the in fl ammable liquid. Brea thing exhaus t fumes
can kill.
Maintenance saf ety
○ Maintain the unit/machine according to recommended
procedures.
○ Disconnect the spark plug be fore performing maint enance
excep t for carburetor adjustments.
○ Keep oth ers away when making carburetor adjustments.
○ Use only genuine HIT ACHI replacement parts as recommended
by the
manufacturer .
CAUTI ON
Do not disas semble the rec oil star ter . Yo u may get a possibilit y
of personal injury with recoil spring.
000Book_CS40EA_WE.indb 7000Book_CS40EA_WE.indb 7 2010/08/26 10:39:272010/08/26 10:39:27