Bedienungsanleitung Hitachi D13VG2 (Seite 7 von 56) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Portugiesisch, Spanisch)

566244

Zoom out

Zoom in

Vorherige Seite

1/56

Nächste Seite

English

SPECIFICATIONS

Model D10VF D10VG D13VF D13VG

Voltage (by areas)* (110V, 220V, 230V, 240V)

Power input 710W*

No load speed 0–3,000min

–1

0–1,200min

–1

0–850min

–1

0–600min

–1

Drill chuck capacity 10 mm 13 mm

Steel

Twist Bit 10 mm 10 mm 13 mm 13 mm

Hole Saw – 38 mm 51 mm 70 mm

Capacity Flat Spade Bit 25 mm 32 mm 40 mm 40 mm

Wood Auger Bit – – 32 mm 38 mm

Hole Saw 29 mm 70 mm 102 mm 114 mm

Weight (without cord)

Spec. for keyed chuck 1.8 kg 1.9 kg 2.1 kg 2.1 kg

Spec. for keyless chuck 1.8 kg 1.9 kg 2.0 kg 2.0 kg

*Be sure to check the nameplate on product as it is subject to change by areas.

Model D13VF D13VG

Speed of angle unit LOW(650min

–1

)HIGH(1350min

–1

) LOW(400min

–1

) HIGH(900min

–1

)

Steel

Twist Bit 13 mm 13 mm 13 mm 13 mm

Hole Saw 64 mm 32 mm 70 mm 51 mm

Capacity Flat Spade Bit 40 mm 32 mm 40 mm 40 mm

Wood Auger Bit 38 mm 29 mm 38 mm 32 mm

Hole Saw 114 mm 64 mm 114 mm 102 mm

STANDARD ACCESSORIES

<D10VF>

(1) Chuck wrench (Spec. only for keyed chuck) ...... 1

(1) Side handle ................................................................ 1

(2)Chuck wrench (Spec. only for keyed chuck) ........ 1

<D13VG>

(1) Side handle ................................................................ 1

(2) Handle joint ................................................................ 1

(3) Chuck wrench (Spec. only for keyed chuck) ...... 1

Standard accessories are subject to change without notice.

OPTIONAL ACCESSORIES (sold separately)

<D10VF>

(1) Side handle

(2) Hook (A)

<D10VG>

(1) Hook (A)

(1) Hook (A)

(2) Angle attachment

Optional accessories are subject to change without notice.

APPLICATIONS

⅜ Boring holes in metal, wood and plastic.

PRIOR TO OPERATION

1. Power source

Ensure that the power source to be utilized conforms

to the power requirements specified on the product

nameplate.

2. Power switch

Ensure that the power switch is in the OFF position.

If the plug is connected to a receptacle while the

power switch is in the ON position, the power tool

will start operating immediately, inviting serious

accident.

DRILL SAFETY WARNINGS

1. Wear ear protectors with impact drills.

Exposure to noise can cause hearing loss.

2. Use auxiliary handles supplied with the tool.

Loss of control can cause personal injury.

3. Hold the drill and side handle securely with both

hands when using.

4. Do not wear gloves made of stuff liable to roll up

such as cotton, wool, cloth or string, etc.

5. Prior to drilling into walls, ceilings or floors, ensure

there are no electric cables or conduits inside.

01Eng_D10VF_WE 3/2/09, 20:246

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Hitachi D13VG2 Seite 7

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info