Bedienungsanleitung Hitachi DH24DVA (Seite 7 von 90) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Portugiesisch, Spanisch)

566488

Zoom out

Zoom in

Vorherige Seite

1/90

Nächste Seite

English

PRECAUTIONS FOR CORDLESS ROTARY

HAMMER

1. Always charge the battery at a temperature of 0

– 40°C.

A temperature of less than 0°C will result in over

charging which is dangerous. The battery cannot

be charged at a temperature higher than 40°C.

The most suitable temperature for charging is that

of 20 – 25°C.

2. Do not use the charger continuously.

When one charging is completed, leave the charger

for about 15 minutes before the next charging of

battery.

3. Do not allow foreign matter to enter the hole for

connecting the rechargeable battery.

4. Never disassemble the rechargeable battery and

charger.

5. Never short-circuit the rechargeable battery. Short-

chircuiting the battery will cause a great electric

current and overheat. It results in burn or damage

to the battery.

6. Do not dispose of the battery in fire.

If the battery is burnt, it may explode.

7. When using this unit continuously, the unit may

overheat, leading to damage in the motor and

switch. Please leave it without using it for

approximately 15 minutes.

8. Do not insert object into the air ventilation slots

of the charger.

Inserting metal objects or inflammables into the

charger air ventilation slots will result in electrical

shock hazard or damaged charger.

9. Using an exhausted battery will damage the

charger.

10. When drilling in wall, floor or ceiling, check for

buried electric power cord, etc.

11. Bring the battery to the shop from which it was

purchased as soon as the post-charging battery

life becomes too short for practical use. Do not

dispose of the exhausted battery.

12. Wear ear protections

Exposure to noise can cause hearing loss.

13. Do not touch the bit during or immediately after

operation. The bit becomes very hot during

operation and could cause serious burns.

14. Use auxiliary handles supplied with the tool.

Loss of control can cause personal injury.

15. Always hold the body handle and side handle of

the power tool firmly. Otherwise the counterforce

produced may result in inaccurate and even

dangerous operation.

16. Wear a dust mask

Do not inhale the harmful dusts generated in

drilling or chiseling operation. The dust can

endanger the health of yourself and bystanders.

SPECIFICATIONS

POWER TOOL

Model DH24DVA

No-load speed Save/Power 0 – 520 min

–1

/ 0 – 1050 min

–1

Full-load impact rate Save/Power 0 – 2200 min

–1

/ 0 – 4500 min

–1

Concrete 24 mm

Capacity

Drilling Steel 13 mm

Wood 30 mm

Driving Wood screw 6.2 mm (diameter) × 40 mm (length)

EB2420: Ni-Cd 24 V (2.0 Ah 20 cells)

Rechargeable battery EB2430HA: Ni-MH 24 V (3.0 Ah 20 cells)

EB2433X: Ni-MH 24 V (3.3 Ah 20 cells)

Weight 4.1 kg

⅜ Do not use the “SAVE“ mode when boring holes with the wood drill. There is a likelihood that the motor

will burn out.

CHARGER

Model UC24YFB

Charging voltage 24 V

Weight 0.6 kg

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Hitachi DH24DVA Seite 7

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info