Bedienungsanleitung Hitachi DS 14DFL (Seite 11 von 80) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Portugiesisch, Spanisch)

460187

Zoom out

Zoom in

Vorherige Seite

1/80

Nächste Seite

English

Temperatures at which the

Rechargeable batteries

battery can be recharged

BCL1415, BCL1430, EBL1430,

BCL1815, EBM1830

0°C – 50°C

Table 4

Indications of the lamp

Before Blinks Lights for 0.5 seconds. Does not light

charging for 0.5 seconds. (off for 0.5 seconds)

Lights Lights continuously

Blinks Lights for 0.5 seconds. Does not light

for 0.5 seconds. (off for 0.5 seconds)

Blinks Lights for 1 second. Does not light

for 0.5 seconds. (off for 0.5 seconds)

Overheat

standby

While

charging

Charging

complete

Battery overheated.

Unable to charge.

(Charging will

commence when

battery cools)

Pilot lamp

(red)

constituting the cause of the failures. Once the

charging has been completed, give 15 minutes rest

until the next charging.

⅜ If the battery is recharged when it is warm due to

battery use or exposure to sunlight, the pilot lamp

map light in green.

The battery will not be recharged. In such a case,

let the battery cool before charging.

⅜ When the pilot lamp flickers in red (at 0.2-second

intervals), check for and take out any foreign objects

in the charger’s battery installation hole. If there are

no foreign objects, it is probable that the battery

or charger is malfunctioning. Take it to your

authorized Service Center.

Before using the driver drill, charge the battery as follows.

1. Connect the charger’s power cord to the receptacle.

When connecting the plug of the charger to a

receptacle, the pilot lamp will blink in red

(At 1-second intervals).

2. Insert the battery into the charger.

Firmly insert the battery into the charger till it

contacts the bottom of the charger and checking

the polarities as shown in Fig. 4.

CAUTION

If the batteries are inserted in the reverse direction,

not only recharging will become impossible, but it

may also cause problems in the charger such as

a deformed recharging terminal.

3. Charging

When inserting a battery in the charger, the pilot

lamp will light up continuously in red.

When the battery becomes fully recharged, the pilot

lamp will blink in red (At 1-second intervals).

(See Table 4)

(1) Lamp indication

The indications of the lamp will be as shown in

Table 4, according to the condition of the charger

or the rechargeable battery.

(2) Regarding the temperatures of the rechargeable

battery

The temperatures for rechargeable batteries are as

shown in Table 5, and batteries that have become

hot should be cooled for a while before being

recharged.

Table 5 Recharging ranges of batteries

(3) Regarding recharging time

Depending on the combination of the charger and

batteries, the charging time will become as shown

in Table 6.

Table 6 Charging time (At 20°C)

NOTE:

The charging time may vary according to

temperature and power source voltage.

4. Disconnect the charger’s power cord from the

receptacle

5. Hold the charger firmly and pull out the battery

NOTE:

After charging, pull out batteries from the charger

first, and then keep the batteries properly.

How to make the batteries perform longer.

(1) Recharge the batteries before they become

completely exhausted.

When you feel that the power of the tool becomes

weaker, stop using the tool and recharge its battery.

If you continue to use the tool and exhaust the

electric current, the battery may be damaged and

its life will become shorter.

(2) Avoid recharging at high temperatures.

A rechargeable battery will be hot immediately after

use. If such a battery is recharged immediately after

use, its internal chemical substance will deteriorate,

and the battery life will be shortened. Leave the

battery and recharge it after it has cooled for a while.

Charger

UC18YGL2

Battery

BCL1415, BCL1815 Approx.

40 min.

BCL1430, EBL1430,

Approx.

90 min.

EBM1830

01Eng_DS14DFL_WE 10/16/12, 15:5311

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Hitachi DS 14DFL Seite 11

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Hitachi DS 14DFL

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info