Bedienungsanleitung Hitachi ds 9dvf3 (Seite 15 von 108) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Portugiesisch, Spanisch)

386381

Zoom out

Zoom in

Vorherige Seite

1/108

Nächste Seite

English

4. The scope and suggestions for uses

The usable scope for various types of work based on the

mechanical structure of this unit is shown in Table 6.

Table 6

Work Suggestions

Drilling

Wood

Use for drilling purpose.

Steel

Driving

Machine screw Use the bit or socket matching the screw diameter.

Wood screw Use after drilling a pilot hole.

5. How to select tightening torque and rotational speed

Table 7

Use

Clutch Dial

Position

Rotating speed selection (Position of the shift knob)

LOW (Low speed) HIGH (High speed)

Driving

Machine screw 1 – 22

For 4 mm or smaller diameter

screws.

For 6 mm or smaller diameter

screws.

Wood screw

1 –

For 8 mm or smaller nominal

diameter screws. (DS18DVF3)

For 4.8 mm or smaller nominal

diameter screws. (DS18DVF3)

For 6.2 mm or smaller nominal

diameter screws. (DS14DVF3)

For 3.8 mm or smaller nominal

diameter screws. (DS14DVF3/

DS12DVF3/ DS9DVF3)

For 5.8 mm or smaller nominal

diameter screws. (DS12DVF3/

DS9DVF3)

Drilling

Wood

For 38 mm or smaller diameters.

(DS18DVF3)

For 24 mm or smaller diameters.

(DS18DVF3)

For 30 mm or smaller diameters.

(DS14DVF3)

For 12 mm or smaller diameters.

(DS14DVF3/ DS12DVF3/DS9DVF3)

For 25 mm or smaller diameters.

(DS12DVF3)

For 21 mm or smaller diameters.

(DS9DVF3)

Metal

For drilling with a metal working drill

bit.

––––––––––––––––––––––

CAUTION

○ The selection examples shown in Table 7 should be

considered as general standard. As diﬀ erent types of

tightening screws and diﬀ erent materials to be tightened

are used in actual works proper adjustments are naturally

necessary.

○ When using the driver drill with a machine screw at

HIGH

(high speed), a screw may damage or a bit may loose

due to the tightning torque is too strong. Use the driver

drill at LOW (low speed) when using a machine screw.

6. Mounting and dismounting of the bit

(1) After inserting a driver bit, etc. into

the keyless drill chuck,

ﬁ rmly grasp the ring and tighten the sleeve by turning it

toward the right (in the clockwise direction as viewed

from the front) (See Fig. 9).

○ If the sleeve becomes loose during operation, tighten it

further. The tightening force becomes stronger when the

sleeve is

tightened additionally.

(2) Dismounting the bit

Firmly grasp the ring and loosen the sleeve by turning

it toward the left (in the counter-clockwise direction as

viewed from the front) (See Fig. 9).

(1) Mounting the bit

Loosen the sleeve by turning it toward the left (in the

counterclockwise

direction as viewed from the front)

to open the clip on the keyless chuck. After inserting a

driver bit, etc., into the keyless drill chuck, and tighten

the sleeve by turning it toward the right (in the clockwise

direction as viewed from the front) (See Fig. 10).

○ If the

sleeve becomes loose during operation, tighten it

further.

The tightening force becomes stronger when the sleeve

is tightened additionally.

(2) Dismounting the bit

Loosen the sleeve by turning it toward the left (in the

counterclockwise direction as viewed from the front), and

then take out the bit, etc (See Fig. 10).

CAUTION

When it is no longer possible to loosen the sleeve, use a

vise or similar instrument to secure the bit. Set the clutch

mode between 1 and 11, and then turn the sleeve to the

loose side (left side) while operating the clutch. It should

be easy now to loosen

the sleeve.

7. Conﬁ rm that the battery is mounted correctly

000Book_DS9DVF3_WETha.indb 15000Book_DS9DVF3_WETha.indb 15 2012/06/06 8:46:152012/06/06 8:46:15

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Hitachi ds 9dvf3 Seite 15

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Hitachi ds 9dvf3

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info