Bedienungsanleitung Hitachi DS14DSFL (Seite 11 von 64) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Portugiesisch, Spanisch)

566539

Zoom out

Zoom in

Vorherige Seite

1/64

Nächste Seite

English

(2) Tightening torque indication

The tightening torque diﬀ ers depending on the type of

screw and the material being tightened.

The unit indicates the tightening torque with the

numbers “1, 3, 5 ... 22” on the clutch dial, and a dots.

The tightening toque at position “1” is the weakest

and

the torque is strongest at the highest number (See Fig.

5).

(3) Adjusting the tightening torque

Rotate the clutch dial and line up the numbers “1, 3, 5 ...

22” on the clutch dial, or the dots, with the triangle mark

on the outer body. Adjust the clutch dial

in the weak or

the strong torque direction according to the torque you

need.

CAUTION

○ The motor rotation may be locked to cease while the unit

is used as drill. While operating the driver drill, take care

not to lock the motor.

○ Too long hammering may cause the screw broken

due

to excessive tightening.

3. Change rotation speed

Operate the shift knob to change the rotational speed.

Move the shift knob in the direction of the arrow (See

Figs. 7 and 8).

When the shift knob is set to “LOW”, the drill rotates at a

low speed. When set to “HIGH”,

the drill rotates at a high

speed.

CAUTION

○ When changing the rotational speed with the shift knob,

conﬁ rm that the switch is oﬀ .

Changing the speed while the motor is rotating will

damage the gears.

○ When setting the shift knob to “HIGH” (high speed)

and the position

of the clutch dial is “17” or “22”, it may

happen that the clutch does not engaged and that the

motor is locked. In such a case, please set the shift knob

to “LOW” (low speed).

○ If the motor is locked, immediately turn the power oﬀ . If

the motor

is locked for a while, the motor or battery may

be burnt.

○ To extend the lifetime, the lithium-ion battery equips with

the protection function to stop the output. Therefore, if

the tool is overloaded, the motor may stop. However,

this is not the trouble but the result of protection

function.

In this case, release the switch of tool and

eliminate the causes of overloading.

4. The scope and suggestions for uses

The usable scope for various types of work based on

the mechanical structure of this unit is shown in Table 4.

Table 4

Work Suggestions

Drilling

Wood

Use for drilling purpose.

Steel

Driving

Machine screw Use the bit or socket matching the screw diameter.

Wood screw Use after drilling a pilot hole.

5. How to select tightening torque and rotational speed

Table 5

Use

Clutch Dial

Position

Rotating speed selection (Position of the shift knob)

LOW (Low speed) HIGH (High speed)

Driving

Machine screw 1 – 22

For 6 mm or smaller diameter

screws.

For 6 mm or smaller diameter

screws.

Wood screw

1 –

For 6 mm or smaller nominal

diameter screws. (DS18DSFL)

For 4.8 mm or smaller nominal

diameter screws. (DS18DSFL)

For 6 mm or smaller nominal

diameter screws. (DS14DSFL)

For 3.8 mm or smaller nominal

diameter screws. (DS14DSFL)

Drilling

Wood

For 38 mm or smaller diameters.

(DS18DSFL)

For 24 mm or smaller diameters.

(DS18DSFL)

For 30 mm or smaller diameters.

(DS14DSFL)

For 12 mm or smaller diameters.

(DS14DSFL)

Metal

For drilling with a metal working drill bit.

CAUTION

○ The selection examples shown in Table 5 should be

considered as general standard. As diﬀ erent types of

tightening screws and diﬀ erent materials to be tightened

are used in actual works proper adjustments are

naturally necessary.

○ When using the driver drill with a machine screw at

HIGH

(high speed), a screw may damage or a bit may

loose due to the tightning torque is too strong. Use the

driver drill at LOW (low speed) when using a machine

screw.

NOTE

The use of the battery BSL1415, BSL1815 and

BSL1830 in a cold condition (below 0 degree

Centigrade) can

sometimes result in the weakened

tightening torque and reduced amount of work. This,

however, is a temporary phenomenon, and returns to

normal when the battery warms up.

000Book_DS14DSFL_WE.indb 11000Book_DS14DSFL_WE.indb 11 2011/08/19 14:47:452011/08/19 14:47:45

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Hitachi DS14DSFL Seite 11

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info