Bedienungsanleitung Hitachi DS18DCL (Seite 9 von 68) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Portugiesisch, Spanisch)

566526

Zoom out

Zoom in

Vorherige Seite

1/68

Nächste Seite

English

SPECIFICATIONS

POWER TOOL

Model DS14DCL DS18DCL

No-load speed (Low/High) 0 – 450 / 0 – 1250 min

-1

0 – 450 / 0 – 1250 min

-1

Capacity

Drilling

Wood

(Thickness 18 mm)

30 mm 38 mm

Metal

(Thickness 1.6 mm)

Steel: 12 mm Steel: 13 mm

Driving

Machine screw 6 mm 6 mm

Wood screw

6.2 mm (diameter) × 63 mm (length)

(Requires a pilot hole)

6.8 mm (diameter) × 50 mm (length)

(Requires a pilot hole)

Rechargeable battery

BCL1415: Li-ion

14.4 V (1.5 Ah 4 cells)

BCL1430: Li-ion

14.4 V (3.0 Ah 8 cells)

BCL1815: Li-ion 18 V (1.5 Ah 5 cells)

Weight

1.4 kg 1.8 kg 1.6 kg

CHARGER

Model UC18YKL

Charging voltage 7.2 – 18 V

Weight 0.4 kg

STANDARD ACCESSORIES

In addition to the main unit (1), the package contains the

accessories listed in the table below.

DS14DCL

DS18DCL

1 Plus driver bit (No. 2 × 65L) .................... 1

2 Charger ..................................................1

3 Plastic case ............................................1

Standard accessories are subject to change without notice.

OPTIONAL ACCESSORIES (sold separately)

1. Battery (BCL1415 or BCL1430)

(For DS14DCL)

2. Battery (BCL1815)

(For DS18DCL)

Optional accessories are subject to change without notice.

APPLICATIONS

○ Driving and removing of machine screws, wood screws,

tapping screws, etc.

○ Drilling of various metals.

○ Drilling of various woods.

BATTERY REMOVAL/INSTALLATION

1. Battery removal

Hold the handle tightly and push the battery latch to

remove the battery (see Figs. 1 and 2).

CAUTION

Never short-circuit the battery.

2. Battery installation

Insert the battery while observing its polarities (see

Fig. 2).

CHARGING

Before using the driver drill, charge the battery as follows.

1. Connect the charger’s power cord to the receptacle.

When connecting the plug of the charger to

a receptacle, the pilot lamp will blink in red

(At 1-second intervals).

2. Insert the battery into the charger.

Firmly insert the battery into the charger till it contacts

the bottom of the charger and checking the polarities as

shown in Fig. 3.

CAUTION

If the batteries are inserted in the reverse direction, not

only recharging will become impossible, but it may also

cause problems in the charger such as a deformed

recharging terminal.

3. Charging

When inserting a battery in the charger, the pilot lamp

will light up continuously in red.

When the battery becomes fully recharged, the

pilot lamp will blink in red (At 1-second intervals).

(See Table 1)

(1) Pilot lamp indication

The indications of the pilot lamp will be as shown in

Table 1, according to the condition of the charger or the

rechargeable battery.

01Eng_DS14DCL_WETh.indd 901Eng_DS14DCL_WETh.indd 9 2013/05/17 8:15:172013/05/17 8:15:17

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Hitachi DS18DCL Seite 9

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info