Bedienungsanleitung Hitachi dv 12dv (Seite 30 von 34) (Englisch, Dänisch, Schwedisch, Norwegisch, Finnisch)

386270

Zoom out

Zoom in

Vorherige Seite

1/34

Nächste Seite

English

12. Using the hook

The provided hook is so designed that it can be

installed and removed on either right or left by one

touch.

Use it correctly as occasion demands.

(1) Installing the hook

To begin with, remove the battery from the tool.

Subsequently, insert the hook so that the grooves

at 2 locations of the hook and the 2 protrusions

of the hook installing part of the tool come together,

check and confirm that the hook is securely fixed,

and then install the battery. (See Figs. 10 and 11)

(2) Removing the hook

Remove the hook following the order of installation

in reverse.

CAUTION

⅜ Fix the hook securely before use. Any use with

imperfect installation of the hook as is can result

in injuries.

⅜ When you use the hook, be absolutely sure that

it is in a state where the battery is installed. If you

use it in a state where the battery is removed, the

hook can come off or drop and result in injuries.

⅜ When you carry it hanging on a waist belt, do not

install it on the drill chuck, but you can do so on

the driver bit. If drills and the like with a sharp

point are installed, injuries can result.

MAINTENANCE AND INSPECTION

1. Inspecting the tool

Since use of as dull tool will degrade efficiency and

cause possible motor malfunction, sharpen or

replace the tool as soon as abrasion is noted.

2. Inspecting the mounting screws

Regularly inspect all mounting screws and ensure

that they are properly tightened. Should any of the

screws be loose, retighten them immediately. Failure

to do so could result in serious hazard.

3. Cleaning on the outside

When the impact drill is stained, wipe with a soft

dry cloth or a cloth moistened with soapy water.

Do not use chloric solvents, gasoline or paint thinner,

for they melt plastics.

4. Storage

Store the impact drill in a place in which the

temperature is less than 40°C and out of reach of

children.

5. Service parts list

A:Item No.

B:Code No.

C:No. Used

D:Remarks

CAUTION:

Repair, modification and inspection of Hitachi Power

Tools must be carried out by an Hitachi Authorized

Service Center.

This Parts List will be helpful if presented with the

tool to the Hitachi Authorized Service Center when

requesting repair or other maintenance.

In the operation and maintenance of power tools,

the safety regulations and standards prescribed in

each country must be observed.

MODIFICATIONS:

Hitachi Power Tools are constantly being improved

and modified to incorporate the latest technological

advancements.

Accordingly, some parts (i.e. code numbers and/or

design) may be changed without prior notice.

NOTE

Due to HITACHI’s continuing program of reserch and

development, the specifications herein are subject to

change without prior notice.

Information concerning airborne noise and vibration

The measured values were determined according to

EN50260 and declared in accordance with ISO 4871.

Measured A-weighted sound power level: 102 dB (A)

Measured A-weighted sound pressure level: 91 dB (A)

Uncertainty KpA: 3 dB (A).

Wear ear protection.

The typical weighted root mean square acceleration value:

8 m/s

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Hitachi dv 12dv Seite 30

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Hitachi dv 12dv

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info