Bedienungsanleitung Hitachi DV-DS163A (Seite 43 von 66) (Englisch)

635267

Zoom out

Zoom in

Vorherige Seite

1/66

Nächste Seite

Recording

Recording from DV Input

Before DV dubbing

You can connect a DV-equipped camcorder to this

recorder using a single DV cable for input and output of

audio, video, data and control signals.

• This recorder is only compatible with DV-format

(DVC-SD, DV25) camcorders. Digital satellite tuners

and Digital VHS video recorders are not compatible.

• You cannot connect more than one DV camcorder at

a time to this recorder.

• You cannot control this recorder from external

equipment connected via the DV IN jack (including

two recorders).

• It may not always be possible to control the

connected camcorder via the DV IN jack.

• Digital camcorders can usually record audio as

stereo 16-bit/48kHz, or twin stereo tracks of 12-bit/

32kHz. This recorder can only record one stereo

audio track. Set [DV Rec Audio] option to [Audio 1] or

[Audio 2] as required (see page 21).

• Audio input to the DV IN jack should be 32 or 48kHz

(not 44.1kHz).

• Picture disturbance on the recording may occur if the

source component pauses playback or plays an

unrecorded section of tape, or if the power fails in the

source component, or the DV cable becomes

disconnected.

Recording from a Digital Camcorder

You can record from a digital camcorder connected to

the DV IN jack on the front panel of this recorder. Using

the recorder’s remote, you can control both the

camcorder and this recorder.

Before recording, make sure that the audio input for the

DV IN jack is set up (see page 21).

Tips:

• The source signal must be DVC-SD format.

• Some camcorders cannot be controlled using this

recorder’s remote.

• If you connect a second recorder using a DV cable,

you cannot control the second DVD from this one.

• You cannot control this unit remotely from a

component connected to the DV IN jack.

• You cannot record date and time information from a

DV cassette.

1. Make sure your digital camcorder is connected to

the front panel DV IN jack (see page 16).

2. Select [TV(HDD)] or [TV(DVD)] option on the

HOME menu then press ENTER (see page 17).

3. Check that the DV audio input is as you require.

You can choose between Audio 1 (original audio)

and Audio 2 (overdubbed audio).

• DV Input is set from the [DV Rec Audio] in

sub-menu of the Setup menu. See “DV Recording

Audio” on page 21 for more information.

4. Press INPUT repeatedly to select the DV input.

DV appears in the display window and on the TV

screen.

5. Find the place on the camcorder tape that you want

to the recording to start from.

For best results, pause playback at the point from

which you want to record.

• Depending on your camcorder, you can use this

recorder’s remote to control the camcorder using

the STOP, PLAY and PAUSE functions.

6. Press z (REC) once to start recording.

• Recording is automatically stopped if the recorder

detects no signal.

• You can pause or stop the recording by pressing

(PAUSE/STEP) or  (STOP).

You cannot control the camcorder from this

remote control during recording.

• In Video mode, the final frame of the recording

may remain displayed on screen for a while after

recording stops.

• For timer recording to work properly on this

recorder, the digital camcorder must also be

switched on and in operating.

Troubleshooting

If you cannot get a picture and/or audio through the DV

IN jack, check the bullet points:

• Make sure the DV cable is properly connected.

• Try switching off the connected equipment then

switch back on.

• Try switching the audio input.

Note:

Depending on the connected camcorder, you may not

be able to control it using the remote control supplied

with this recorder.

01EN01DVDS253A(AU).book Page 43 Wednesday, June 7, 2006 3:39 PM

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Hitachi DV-DS163A Seite 43

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info