Bedienungsanleitung Hitachi DZ-GX20E (Seite 89 von 179) (Englisch)

2891

Zoom out

Zoom in

Vorherige Seite

1/179

Nächste Seite

English

USING THE ELECTRONIC IMAGE STABILISER (EIS)

When you use zoom (see page 59) to record a magnified subject image, it will correct fuzziness in the

recorded image.

1 Press the MENU

button, choose “EIS” on

the “Camera Functions

Setup” menu screen,

and then press the A

button.

2 Choose the “On” or “Off”, and then press the

A button.

3 Press the MENU button to end the setting.

●Checking EIS On or Off

You can check EIS On or Off by the on-screen

information display.

After recording with EIS set to “Off”, it is

recommended that you return the setting to

“On” and then turn the DVD video camera/

recorder off, unless you normally record with

“Off” setting.

Note:

• The EIS setting will be stored in memory even when

the DVD video camera/recorder is turned off.

• It is recommended that you specify “EIS Off” when

using the DVD video camera/recorder on a desk or

tripod.

• When “EIS On” is specified, there will be a slight

difference between the actual movement and the

movement on screen.

• Gross camera shake may not be entirely corrected

even if “EIS On” is specified: Firmly hold the DVD

video camera/recorder with both hands.

• EIS may not operate correctly when the tele or wide-

conversion lens is used.

• EIS cannot be used when recording photos on DZ-

GX20E or DZ-MV780E.

RECORDING SUBJECT USING LARGE MAGNIFICATION (DIGITAL ZOOM)

See page 59 for setting on digital zoom.

REDUCING WIND NOISE DURING RECORDING (MIC.FILTER)

When recording sound from the microphone built into this DVD video camera/recorder, you can

reduce wind noise in recording.

If “MIC.Filter: ON” is specified, the low-frequency components in the sound picked up by

microphone will be cut off during recording: This makes it easier to hear the target voice or sound

during playback.

1 Press the MENU

button, choose

“MIC.Filter” on the

“Camera Functions

Setup” menu screen,

and then press the A

button.

2 Choose the desired option, and then press the

A button.

3 Press the MENU button

to end the setting.

Note:

• You can also use the on-

screen display to confirm

that the MIC.Filter has been

set.

• The MIC.Filter setting will be stored in memory even

when the DVD video camera/recorder is turned off.

• The MIC.Filter function will work only during movie

recording.

• The microphone filter function works only with the

built-in microphone: It will not function when using an

external microphone (p. 77).

Progra

hi te Bal.

Dig. Z

oom

EIS

Of f

ENTER RETURN

RAM

MIC.Fi l ter

era Funct i ons Setup

3 0 MIN

0:00:00

REM

FINE

8:00

30/ 9 /2005

EIS

RAM

Progra

hi te Bal.

Dig. Zoo

MIC.Fi l ter

EIS

ENTER RETURN

Camera Func t i ons Setup

3 0 MIN

0:00:00

REM

FINE

8:00

30/ 9 /2005

Microphone filter icon

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Hitachi DZ-GX20E Seite 89

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Hitachi DZ-GX20E

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info