Bedienungsanleitung Hitachi DZ-GX3300A (Seite 136 von 166) (Englisch)

596348

136

Zoom out

Zoom in

Vorherige Seite

1/166

Nächste Seite

English

136

Disc error has occurred.

Keep disc inside &

restart.

Disc error could have occurred during editing of scenes.

Turn off the DVD video camera/recorder with the disc being used

in it, connect AC adapter/charger, and then power the DVD video

camera/recorder again. Repair of scenes will be tried.

Disc error has occurred.

Unfinalizing is not

complete.

This message will appear when disc error occurred during

unfinalization, and unfinalizing disc failed. Replace the disc. 103

Disc error has occurred. • Use another disc.

• See *3 and *4 on page 139.

10, 24

• Mismatch in recording information may be caused by editing

done on some device other than this DVD video camera/

recorder.

Initialize the disc or use another disc.

• Initializing the disc will erase all data on it.

Disc full. Cannot

execute.

Delete unnecessary scenes before using this disc, or use another

disc.

Disc has no data. This message will appear when an attempt is made to execute

playback or editing on Disc Navigation with no scene recorded.

—

Disc has no PlayList. Switching of play list was selected with no play list stored. 93

Disc includes protected

scenes. Delete scenes?

The disc may be software protected from a device other than this

DVD video camera/recorder. To release this case, use a device

that has executed software-protect.

—

Disc is full. Cannot add

control info.

The number of entered scenes has reached the limit that can be

entered, so the control information for generating thumbnails

cannot be added.

Combine several scenes or delete them.

79, 81

Disc is not formatted.

Format the disc now?

• Has the disc been initialized on a PC?

Choose “YES” and initialize the disc when using it on this DVD

video camera/recorder. Initialization will delete all data on the

disc.

• See *2 on page 139.

Disc must be finalized

before it can be played

back on DVD player or

DVD recorder.

• This message will appear if you remove a DVD-RW (VF-mode)/

DVD-R that has not been finalized from the DVD video camera/

recorder.

• See *5 on page 139.

108

Drive overheat. Please

retry later.

The temperature inside the DVD video camera/recorder is too

high, and reading or writing of the data on disc may not be

performed normally.

Turn the DVD video camera/recorder off and wait for a while. The

temperature will be effectively decreased if the DVD video

camera/recorder is placed in a well-ventilated spot.

DVD-R* Disc, 16:9

mode cannot be

changed, when Video

mode is STD.

With DVD-RW (VF-mode)/DVD-R/+RW disc, the setting of 16:9

mode will not be possible when the Video mode is STD.

* “DVD-RW (VF)” will appear when using a DVD-RW (VF-mode),

“+RW” will appear when using a +RW.

DVD-R* Disc, Input

Source cannot be

changed.

Once a DVD-RW (VF-mode)/DVD-R disc has been recorded in

the 16:9 mode, the input source will not be changeable.

* “DVD-RW (VF)” will appear when using a DVD-RW (VF-mode).

Message Cause & Troubleshooting

Reference

page

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Hitachi DZ-GX3300A Seite 136

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info