Bedienungsanleitung Hitachi DZ-MV270A (Seite 84 von 114) (Englisch)

604699

Zoom out

Zoom in

Vorherige Seite

1/114

Nächste Seite

English

Note: The status bar of scene being played back

can be switched off or on by pressing the DISPLAY

button.

Note: If you choose “NO” on the screen for veri-

fying division in step 4, division will be canceled.

Note: Search and frame advance are useful

when designating division points.

Note: If you press the MENU button while the

scene to be divided is being played back in step

2, the DVD video camera/recorder will enter the

playback pause status, and the “Go To” menu will

appear. You can jump to the first image, end im-

age or any specified point of the scene. (See

“Searching for Scene You Wish to View by Speci-

fying It (Go To)” for details on “Go To”.) You can

divide the scene at the point you have jumped

to.

Note: If a special effect has been added to the

original scene, the “In” effect will be added to the

first half of scene, and the “Out” effect, to the lat-

ter half.

Note: The division point may drift before or after

the designated point by approximately 0.5 sec-

onds.

Note: Since a scene with a skip set cannot be

played back, no division point can be specified:

Release the skip for the scene before dividing it.

Note: If the division point is at a still, a message

will appear, but no division will be made.

Note: If the division point is at the start or end of a

scene, a message will appear, but no division will

be made.

Note: A scene of 0.5 seconds or less cannot be

divided.

Note: If free space available on disc is insuf ficient,

division will not be possible: Delete unnecessary

scenes.

Note: Pressing the

button on the screen for veri-

fication will restore the thumbnail display screen.

Arranging Order of Scenes (Move)

You can move scenes within a play list to arrange the order as you want.

Select the scene to be moved, and then press the

MENU button.

The Disc Navigation menu screen will appear.

Use the joystick to

choose “Scene”, “Edit”,

“Move”, and then press

the button.

The “Select Insert Point”

screen will appear, and

the “I” mark will appear.

Move the “ ” mark to

the position where you

wish to move the scene,

and then press the

button.

The screen for verifying movement of scene will

appear.

If you are sure that you wish to move the scene,

choose “YES”, and then press the button.

The message for movement will appear, and

then the thumbnail display screen will be re-

stored.

Note: To move consecutive multiple scenes to-

gether, select scenes referring to “Selecting Con-

secutive Scenes Together” or “Selecting Random

Scenes” on page 70.

Note: Choosing “NO” on the screen for verifying

movement in step 4 will cancel movement.

Note: Still images can also be moved.

Note: Pressing the

button on the screen for veri-

fication will restore the thumbnail display screen.

Insertion position

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Hitachi DZ-MV270A Seite 84

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info