Bedienungsanleitung Hitachi fdv 20 va (Seite 5 von 33) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Spanisch)

387428

Zoom out

Zoom in

Vorherige Seite

1/33

Nächste Seite

English

3. Extension cord

When the work area is removed from the power

source. Use an extension cord of sufficient thickness

and rated capacity. The extension cord should be

kept as short as practicable.

4. Mounting and dismounting of the bit.

For Drill chuck with chuck wrench (Fig. 1)

Fit the drill bit into the chuck and use the chuck

wrench to secure it, tightening the chuck by each

of the three holes in turn.

For keyless chuck (Fig. 2, 3)

(1) Mounting the bit

Turn the lock collar in the direction “AUF. RELEASE”

and open the chuck. After Inserting the drill bit Into

the chuck as far it will go, turn the lock collar in

the “GRIP . ZU” direction. Grip the retaining ring

and close the chuck by turning the sleeve clockwise

as viewed from the front.

(2) Dismounting the bit

Turn the lock collar in the direction “AUF. RELEASE”

to release the shucking force. Grip the retaining ring

and open the chuck by turning the sleeve

counterclockwise.

NOTE

When the sleeve does not become loose any further,

fix a regular spanner to spindle, hold regular spanner

firmly, then turn the sleeve to loosen by hand. (Fig.

5. Selecting the appropriate drill bit

⅜ When boring concrete or stone

Use the drill bits specified in the Optional

Accessories.

⅜ When boring metal or plastic

Use an ordinary metalworking drill bit.

STANDARD ACCESSORIES

(1) Chuck Wrench (Spec. only for chuck fitted with

chuck wrench)............................................................ 1

(2) Side Handle................................................................ 1

(3) Depth Gauge .............................................................. 1

(4) Plastic Case ................................................................ 1

Standard accessories are subject to change without notice.

OPTIONAL ACCESSORIES (sold separately)

⅜ Impact Drill Bit (for concrete)

3.2 mm – 20 mm dia.

Optional accessories are subject to change without notice.

APPLICATIONS

⅜ By combined actions of ROTATION and IMPACT:

Boring holes in hard materials (concrete, marble,

granite, tiles, etc.)

⅜ By ROTATIONAL action:

Boring holes in metal, wood and plastic.

PRIOR TO OPERATION

1. Power source

Ensure that the power source to be utilized conforms

to the power requirements specified on the product

nameplate.

2. Power switch

Ensure that the power switch is in the OFF position.

If the plug is connected to a receptacle while the

power switch is in the ON position, the power tool

will start operating immediately, inviting serious

accident.

PRECAUTIONS ON USING IMPACT DRILL

1. Wear ear protectors with impact drills.

Exposure to noise can cause hearing loss.

2. Use auxiliary handles supplied with the tool.

Loss of control can cause personal injury.

3. Before drilling into walls, ceilings or floors, ensure

that there are no concealed power cables inside.

4. When boring concrete or similar hard materials in

IMPACT mode, set the bit rotation switch lever to

the R-side. (Fig. 8)

5. Avoid tightening work of screws, bolts, and nuts;

otherwise, rotating sections may be stopped all of

a sudden, resulting in the malfunction of the main

body and risk of injury.

Voltage (by areas)* (110V, 115V, 120V, 127V, 220V, 230V, 240V)

Power input 750W*

Speed change 1 2

No load speed 0 – 1300 min

–1

0 – 3000 min

–1

Steel 13 mm 8 mm

Capacity Concrete 20 mm 13 mm

Wood 40 mm 25 mm

Full load impact rate 15000 min

–1

35000 min

–1

Weight (without cord) 2.2 kg

SPECIFICATIONS

*Be sure to check the nameplate on product as it is subject to change by areas.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Hitachi fdv 20 va Seite 5

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info