Bedienungsanleitung Hitachi fdv16vb2 (Seite 21 von 29) (Englisch, Dänisch, Schwedisch, Norwegisch, Finnisch)

386273

Zoom out

Zoom in

Vorherige Seite

1/29

Nächste Seite

English

Set the side handle to a position that is suited to

the operation and then securely tighten the side

handle grip.

5. Mounting and dismounting of the bit

For keyless chuck

(1) Mounting the bit

After inserting a driver bit, etc. into the keyless drill

chuck, firmly grasp the ring and tighten the sleeve

by turning it toward the right (in the clockwise

direction as viewed from the front) (See Fig. 1).

⅜ If the sleeve becomes loose during operation, tighten

it further. The tightening force becomes stronger

when the sleeve is tightened.

(2) Dismounting the bit

Firmly grasp the ring and loosen the sleeve by

turning it toward the left (in the counterclockwise

direction as viewed from the front) (See Fig. 1).

NOTE

When the sleeve does not become loose any further,

fix the side handle to the sleeve. Then, strike the

grip of the side handle to the left in order to loosen

the sleeve,while holding the ring by hand (Fig. 2).

CAUTION

Do not fix the side handle to the ring of the keyless

chuck because of a risk that doing so may damage

the ring.

For Drill chuck with chuck wrench

Fit the drill bit into the chuck and use the chuck

wrench to secure it, tightening the chuck by each

of the three holes in turn (Fig. 3).

6. Selecting the appropriate drill bit

⅜ When boring concrete or stone:

Use the drill bits for concrete.

⅜ When boring metal or plastic:

Use an ordinary metalworking drill bit.

⅜ When boring wood:

Use an ordinary woodworking drill bit. However,

when drilling 6.5 mm or smaller holes, use a

metalworking drill bit.

7. Selecting the driver bit

Screw heads or bits will be damaged unless a bit

appropriate for the screw diameter is employed to

drive in the screws.

SPECIFICATIONS

* Be sure to check the nameplate on product as it is subject to change by areas.

STANDARD ACCESSORIES

For entire area

(1) Side handle ................................................................1

(2) Depth stopper ............................................................1

For partial areas

(1) Chuck wrench ............................................................ 1

(For drill chuck with chuck wrench)

(2) Plastic case.................................................................1

Standard accessories are subject to change without

notice.

APPLICATION

⅜ By combined action of ROTATION and IMPACT:

Boring holes in concrete, marble, granite, tile, and

similar materials.

⅜ By ROTATIONAL action:

Boring holes in metals, wood and plastics.

Tightening wood screws.

PRIOR TO OPERATION

1. Power source

Ensure that the power source to be utilized conforms

to the power requirements specified on the product

nameplate.

2. Power switch

Ensure that the power switch is in the OFF position.

If the plug is connected to a receptacle while the

power switch is in the ON position, the power tool

will start operating immediately, which could cause

a serious accident.

3. Extension cord

When the work area is removed from the power

source, use an extension cord of sufficient thickness

and rated capacity. The extension cord should be

kept as short as practicable.

4. Fixing the side handle

Attach the side handle to the mounting part.

Rotate the side handle grip in a clockwise direction

to secure it.

Voltage (by areas)* (110V, 115V, 120V, 127V, 220V, 230V, 240V)

Power Input 550 W*

No-Load Speed 0 – 2900 min

-1

Capacity Steel 13 mm

Concrete 16 mm

Wood 25 mm

Weight (w/o cord) 1.6 kg

Additional rules for impact drills

- Wear ear protection

Exposure to noise can cause hearing loss.

- Use auxiliary handles supplied with the tool.

Loss of control can cause personal injury.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Hitachi fdv16vb2 Seite 21

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Hitachi fdv16vb2

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info