Bedienungsanleitung Hitachi fsv 13 y (Seite 7 von 38) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Spanisch)

389526

Zoom out

Zoom in

Vorherige Seite

1/38

Nächste Seite

English

PRECOUTIONS ON USING RONDOM ORBIT

SANDER

The sanding action of the Random Orbit Sander is differ-

ent to that of a conventional disk or orbital sander. For

best results follow these simple operating procedures:

1. Work with the pad flat on the work surface. Because

of the eccentric orbit, the sander may be damaged

if it is operated at an angle to the working surface.

(Fig. 1)

2. Do not use excessive pressure - let the abrasive do

the cutting.

3. Take care that the pad does not strike against

adjacent surfaces or into corners. Repeated impacts

will damage the pad. (Fig. 2)

4. Once the sanding paper begins to clog, particularly

with paint and glue, it will quickly over heat. Change

the sanding paper after it has cooled down!

5. Sanding generates considerable heat. Do not keep

sanding after the sanding paper is too hot to touch

as the heat will melt the hooks on the pad. The

sanding paper will then no longer adhere to the

pad which can cause injury to the operator or

bystanders. It is recommended that the sanding

paper be allowed to cool down after each 5-10

minutes of operation.

Note: Use on plaster, fibregrass or varnished sur-

faces is not recommended.

6. Do not concentrate the sanding head on sharp

edges. This will cause sanding paper to overheat,

resulting in a deterioration of the pad. (Fig. 3)

7. Use only genuine HITACHI replacement sanding

paper. Non-genuine sanding paper (particularly

ventilated discs) can cause the pad hooks to clog.

This will prevent sanding paper from clinging to the

pad.

STANDARD ACCESSORIES

1. Front knob ................................................................... 1

2. Dust bag ...................................................................... 1

3. Sanding paper (Grain: #120) ..................................... 1

4. Hexagon bar wrench 4 mm ....................................... 1

Standard accessories are subject to change without no-

tice.

OPTIONAL ACCESSORIES (sold separately)

1. Cleaner adapter

2. Dust cover

3. Polyester buff

4. Sanding paper

Grain: #40, #60, #80, #120, #180, #240, #320,

#400 (8 types)

Optional accessories are subject to change without no-

tice.

APPLICATIONS

⅜ Roughing or finishing of woodwork and metal sur-

faces.

⅜ Preliminary sanding of woodwork and metal sur-

faces before painting.

⅜ Paint removal

⅜ Rust removal

PRIOR TO OPERATION

1. Power source

Ensure that the power source to be utilized con-

forms to the power requirements specified on the

product nameplate.

2. Power switch

Ensure that the power switch is in the OFF position.

If the plug is connected to a receptacle while the

power switch is in the ON position, the power tool

will start operating immediately, inviting a serious

accident.

3. Extension cord

When the work area is removed from the power

source, use an extension cord of sufficient thickness

and rated capacity. The extension cord should be

kept as short as practicable.

SPECIFICATIONS

Model FSV13Y FSV13YA

Voltage (by areas)* (110V, 115V, 120V, 127V, 220V, 230V, 240V)

Power Input 270 W*

No-Load Speed 6500 – 11000/min 11000/min

Orbit diameter 5 mm

Pad size (Outer diameter) 125 mm

Weight (without cord) 1.7 kg

*Be sure to check the nameplate on product as it is subject to change by areas.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Hitachi fsv 13 y Seite 7

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info