Bedienungsanleitung Hitachi H25PV (Seite 6 von 40) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Portugiesisch, Spanisch)

568859

Zoom out

Zoom in

Vorherige Seite

1/40

Nächste Seite

English

DEMOLITION HAMMER SAFETY WARNINGS

1. Wear ear protectors

Exposure to noise can cause hearing loss.

2. Use auxiliary handle(s), if supplied with the tool.

Loss of control can cause personal injury.

3. Hold power tool by insulated gripping surfaces, when

performing an operation where the cutting accessory

may contact hidden wiring or its own cord. Cutting

accessory contacting a "live" wire may make exposed

metal parts of the power tool "live" and could give

the operator an electric shock.

4. Do not touch the bit during or immediately after

operation. The bit becomes very hot during operation

and could cause serious burns.

5. Before starting to break, chip or drill into a wall, floor

or ceiling, thoroughly confirm that such items as

electric cables or conduits are not buried inside.

6. Wear a mask when turning your head upward.

7. Properly set the bit holder.

8. At the start of work, confirm screw tightening.

9. When working at a highly elevated location, pay

attention to articles and persons below.

10. Wear protective shoes to protect your feet.

11. Make positively certain that you wear gloves when

engaged in work for a long time since the grip can

become very hot.

12. There is also a risk for a tool to be damaged, and

therefore exercise utmost caution for any possible

fall of the tool when you work at an elevated place.

STANDARD ACCESSORIES

(1) Case ............................................................................. 1

Standard accessories are subject to change without

notice.

OPTIONAL ACCESSORIES (sold separately)

⅜ Demolishing

Bull point (Square type) (Round type)

(SDS-plus shank)

⅜ Groove digging and edging

Cold chisel (SDS-plus shank)

Cutter (SDS-plus shank)

⅜ Grooving

Grooving chisel (SDS-plus shank)

⅜ Hammer Grease A

500 g (in a can)

70 g (in a tube)

30 g (in a tube)

Optional accessories are subject to change without

notice.

APPLICATIONS

Demolishing concrete, chipping off concrete, grooving,

bar cutting, and driving piles.

Application examples:

Installation of piping and wiring, sanitary facility

installation, machinery installation, water supply and

drainage work, interior jobs, harbor facilities and other

civil engineering work.

PRIOR TO OPERATION

1. Power source

Ensure that the power source to be utilized conforms

to the power requirements specified on the product

nameplate.

2. Power switch

Ensure that the power switch is in the OFF position. If

the plug is connected to a receptacle while the power

switch is in the ON position, the power tool will start

operating immediately, which could cause a serious

accident.

3. Extension cord

When the work area is removed from the power

source, use an extension cord of sufficient thickness

and rated capacity. The extension cord should be

kept as short as practicable.

4. Installing Tools

CAUTION:

Be sure to switch power OFF and disconnect the plug

from the receptacle to avoid serious trouble.

NOTE:

When using tools such as bull points, cutters, etc.,

make sure to use the genuine parts designated by

our company.

(1) Clean the shank portion of the tool.

(2) As shown in Fig. 1, pull grip in the direction of

and insert the tool into a hole of the front cap.

(3) Adjust the groove position while turning the tool,

and furthermore insert it until it hits the end of the

hole.

SPECIFICATIONS

Voltage (by areas)* (110 V, 230 V, 240 V)

Power Input 500 W*

Full-load Impact Rate 0 – 3200 min

–1

Weight (without cord, side handle) 3.2 kg

* Be sure to check the nameplate on product as it is subject to change by areas.

01Eng_H25PV_WE 1/18/12, 9:10 AM5

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Hitachi H25PV Seite 6

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info