Bedienungsanleitung Hitachi HDB60 (Seite 16 von 25) (Englisch)

505947

Zoom out

Zoom in

Vorherige Seite

1/25

Nächste Seite

- 15 -

Hint

You can also enter a channel name using the

number keys on the remote control. Each key

represents several letters and pressing a key

several times will enter each letter (in both

capitals and lower case), and the number, in

turn, in the character position marked by the

cursor. The zero key enters all the punctuation

marks available and a blank space. With

practise, this is a very quick means of entering

the required letters into the channel name.

CHANNEL AND MENU PROTECTION

CHANNEL LOCK

Some channels broadcast material which you do not

want younger members of the family to watch. Any

channel can be 'locked' so that it cannot be selected

for viewing without first a four-digit PIN code being

entered. In this way any channel not suitable for

younger viewers can be protected.

The channel lock is applied with the Channel List

menu. Press the [MENU] key on the remote control

handset to display the Main Menu and then, using

the [UP] or [DOWN] keys on the remote control,

make sure that the first item, Channel List, is

highlighted in yellow and press the [SELECT] key.

Highlight the channel to be locked using the [UP] or

[DOWN] keys. Now select the LOCK button at the

base of the screen with the [LEFT] or [RIGHT] keys

and press [SELECT].

A window requesting the PIN code is displayed and

the four-digit code should be entered using the

number keys on the remote control, followed by the

[SELECT] key. A lock icon is then displayed

alongside the channel name in the channel list.

Hint

The PIN is factory set to 0000. This code should

be reset (as described below) to another

sequence of numbers, known only to you, when

you have finished setting up the receiver.

You can now leave the Channel List screen and

return to normal TV viewing by pressing [MENU].

Any attempt to change channel to the locked

channel will now display the same window requesting

the PIN code and the channel will only be displayed

on entry of the correct code. To remove the lock on

a channel, repeat the same process as to lock the

channel.



MENU LOCK

Simply locking a channel will not deflect a

determined would-be viewer. Re-installing the

complete channel list, for example, will bypass the

channel lock. However, the menus can be locked

out of use too, to prevent this.

Display the Main Menu by pressing the [MENU] key,

highlight Configuration, and press [SELECT] to

display the Configuration menu screen. Highlight the

Parental Settings line of the menu (press [DOWN]

five times) and press [SELECT] to display the

Parental Settings menu (after the PIN code has been

entered). Here the menu lock-out can be set and the

PIN code changed.

With the Menu Lock line highlighted, use the [LEFT]

or [RIGHT] to cycle the menu lock setting through

Disabled, Main Menu and Installation. The Main Menu

setting will lock out the complete menu system; the

Installation Menu setting locks only the Installation

menu (see Section 3 - ADVANCED OPERATION -

Re-installation); and the Disabled setting allows free

access to any of the menus.

You must return to normal TV viewing by pressing

the [MENU] key (three times) to activate the lock.

Now any attempt to access the locked menus will

display the PIN request window and the menus will

only be displayed on entry of the correct PIN code.

The same Parental Settings menu is used to change

the PIN code. With the Set Lock Key line

highlighted, press [SELECT] to display the Set Lock

Key window. This requests the new four-digit code

to be entered twice (for confirmation) and the new

code comes in effect when you return to the

Configuration menu by pressing [MENU].

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Hitachi HDB60 Seite 16

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info