Bedienungsanleitung Hitachi HDR162 (Seite 35 von 42) (Englisch)

505957

Zoom out

Zoom in

Vorherige Seite

1/42

Nächste Seite

WIDE

TV sets are available with screens of the standard (4:3) format and widescreen (16:9) format. When

you first installed your receiver you specified the format of the connected TV (this can now be altered if

necessary; see Configuration)Digital terrestrial television broadcasts are also made in both standard

and widescreen formats. In particular, films and dramas tend to be broadcast in widescreen format to

closer emulate the cinema experience, but some programmes such as news bulletins are 4:3. To help

get the most from both TV set and programme when a widescreen film is watched on a standard TV,

or a standard broadcast is viewed on a widescreen set, the receiver includes the WIDE key.So long as

the receiver has been correctly set up for the TV set connected, a widescreen programme will always

be displayed correctly on a widescreen set, and a standard format programme will correctly fill the

screen of a standard format TV.

With a widescreen TV set displaying a standard format programme the WIDE key switches between

displaying the picture with black bars down the sides, and enlarging the picture so that it fills the whole

width of the screen but the top and bottom are cropped off.With a standard format TV displaying a

widescreen programme, the WIDE key switches between displaying the picture with black bars at the

top and bottom of the screen, and filling the whole height of the screen but cropping the sides off

according to instructions broadcast with the programme (called 'pan and scan').The effect of the WIDE

key on the picture display is cancelled by pressing WIDE again.

NOTE:

Sometimes the TV will automatically try and compensate for an incorrect screen format, in this

instance set the tv to the correct format whilst viewing the programme.

8. TROUBLE SHOOTING GUIDE

Problem Possible Reason What to do

The LED indicator

does not glow

Mains cable is

not connected

Check if the main cable is not

plugged into the power socket.

No picture or sound No signal or weak signal.

Check the Aerial and scart

connections

The settings you have made

in the menus have not been

changed.

The digital set-top box was

unplugged without first

going to standby.

Before unplugging your digital set-

top box, make sure it is in standby

The remote control is not

working.

The digital set-top box is in

Stand by.

Remote control is

incorrectly aimed.

Battery exhausted.

Press the standby key.

Check if anything is obstructing the

front panel .

Change the batteries

Password forgotten.

Take contact with the nearest

service center.

Record does not start.

No or weak Aerial 2 input

Signal.

Check Aerial 2 input connection.

No PIP video.

No or weak Aerial 2 input

Signal.

PIP Channel is radio or

teletext based.

Check Aerial 2 input connection.

Use PIP+ / PIP- to choose a valid

TV channel.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Hitachi HDR162 Seite 35

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info