505962
18
Zoom out
Zoom in
Vorherige Seite
1/27
Nächste Seite
English - 17 -
Auto Power Down
This box will automatically switched from active mode
into standby mode, after less than three hours in
active mode, following the last user interaction and/or
a channel change with an alert message two minutes
before going in to standby mode. The Automatic
power-down will be set as default and the user will
be able to change Automatic power down to on or
off in the menu
Receiver Upgrade
Over Air Download (OAD): To ensure that your STB
always has the most up todate information. Please
ensure that after use it is set to its standby mode.
The STB automatically powers up at 3.00 A.M. each
day and searches for any new information which may
be broadcast and will download this to your receiver
automatically. This operation will normally take
approximately 30 minutes. If you have an important
recording to make at 3.00 A.M. which must not have
a 30 minutes interrupt then you can disable the auto
OAD search by performing the following:
• Press Menu button and using the “
”/“ buttons to
choose Setup and press the OK button.
• Highlight Conguration menu with “
”/“ keys and
pres OK.
• Use “
”/“ buttons to choose “RECEIVER
UPGRADE” and press OK button.
• Using the left / right button change “Automatic
scanning” from Enabled to Disabled.
• Highlight “Scan for upgrade” menu with “
”/“ keys
and press OK to commence upgrade.
Do not forget to re enable the automatic OAD function
after you have made your recording by repeating the
above instructions but this time selecting ENABLE.
Parental Locking
Use “ ”/“ buttons to go to Parental Lock option.
Press OK button to enter the menu. A box asking for
the lock key is displayed. The key is set to “0000”
initially. Enter lock key. If it is incorrect, “Wrong Pin”
is displayed. If it is correct, the Parental Control Menu
is displayed.
Menu Lock
In menu lock you can set locking for All Menus, or the
Installation Menu to restrict access to these menu’s. If the
menu lock is disabled, there will be free access to the menu
system. Use “
”/“ buttons to go to Menu Lock option.
Use “
”/“ buttons to choose Menu Lock Mode.
DISABLED : All menus are unlocked.
ALL MENUS : All Menus are accessible only with the
correct lock key.So the user can’t add, delete, rename,
channels, can’t set timers.
INSTALLATION MENU : Installation menu is locked.So
the user can’t add channels. Changes will be updated after
exiting µ&RQ¿JXUDWLRQ0HQX¶.
Set Pin
The PIN code of the unit changed. Use “ ”/“ buttons to
go to “Set PIN” option. Press OK to display the “Set PIN”
window. Use NUMERIC buttons to enter new pin number
you will need to input your new pin a second time for
verication purposes. If Both pin numbers are four digits
long and the same, the pin will be changed. The factory
default pin number is 0000, if you change the pin number
make sure you write it down and keep it safe.
Language
In this menu the user can adjust the preferred language.
Language is changed by pressing OK key.
Menu: shows the language of the system
Preferred
These settings will be used if available. Otherwise the
current settings will be used.
Audio: by pressing “
”/“ keys change the audio
language.
18

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Hitachi HDR325 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info