370702
33
Zoom out
Zoom in
Vorherige Seite
1/57
Nächste Seite
33
You can search by inputting the time code.
The time code corresponds to the approximate actual playing
time. For example, to search for a scene 2 hours 30 minutes
20 seconds past the beginning, key in 02:30:20.
Note
This function is not available for CD and MP3.
If the playing disc is DVD
1 Press the GOTO button, the following menu appears on
the TV screen.
TITLE 02 / 05 CHAPTER 001 / 006
2 Use the or button to select title number or chapter
number.
TITLE 02 / 05 CHAPTER 001 / 006
TITLE 02 / 05 CHAPTER 001 / 006
Use the number buttons (0~9 / +10) to input the title or
chapter number you want.
3 Press ENTER to play your selection.
4 Follow Step 1, press the GOTO button again to enter time
menu shown as below.
TITLE 02 / 05 TIME - - : - - : - -
5 Use the number buttons (0~9 / +10) to input the time code
you want.
For example, key in 0, 1, 2, 3, 4, 5.
TITLE 02 / 05 TIME 01 : 23 : 45
6 Press ENTER to start playing (from the point of 01:23:45).
7 Follow Step 4, press the GOTO button again to exit.
Note
If the title number, chapter number or time code you input is
not exist in the disc, the system will not execute your selec-
tion and the selecting menu will exit.
The selecting menu will time out for a few seconds if you do
not input valid number.
If the playing disc is Video CD
1 Press the GOTO button.
The time menu appears on the TV screen.
GOTO: - - : - -
2 Use the number buttons (0~9 / +10) to input the time code
you want.
For example, key in 0, 1, 2, 3.
GOTO: 01 : 23
When the last digit is input and the time code is valid, the
system will begin to play (from the point of 01:23).
3 Follow Step 1, press the GOTO button again to exit.
Selecting a Track Using
Number Buttons
You can select a track directly using the number (0~9 / +10)
buttons
In play or stop mode, press the number button to select a
track you want. The system will go to the beginning of the
selected track and start playing it.
If the track number is more than 10, use the +10 button. The
number will increase 10 whenever you press +10 once.
For example, you want to select the track of 25. Press the
+10 button twice, then press 5 button.
Note
This function is not available for DVD.
If the PBC function is set to on, you cannot select the track
on the Video CD (Ver. 2.0) or SVCD using number buttons
directly. About PBC, see page 30.
Selecting a Start Point Using the Time Code
Number
buttons
/ / /
GOTO
STANDBY
SUB
TITLE
DVD TUNER AUX
LANGUAGE TITLE RETURN
ANGLEGOTO
MENU
/PBC
ZOOM
SETUP
AUDIO1
DISPLAY
2 3
4 5 6
7 8 9
>10 0
N/P
SLEEP MUTE
OPEN/
CLOSE
ENTER
N
A-B REPEAT PROG. SELECT
LISTENING
TEST
TONE
ADJ/VOL
STOP
PLAY/PAUSE
STEP
SLOW
+
STA- STA + ST/MO
T U TUN + MEMO
ENTER
33

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Hitachi htd k 150 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info